當前位置：常州市華夏干燥制粒設備有限公司>>干燥蒸發設備>>滾筒刮板干燥機

滾筒刮板干燥機

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地

在線詢價 收藏產品

聯系方式：查查看聯系方式

更新時間：2026-09-06 07:29:43瀏覽次數：31次

聯系我時，請告知來自制藥網

產品分類 品牌分類

暫無信息

常州市華夏干燥制粒設備有限公司

經營模式：經銷商

商鋪產品：36條

所在地區：江蘇

聯系人：查（總經理）

詢價 給他留言

產品簡介

輥筒刮板干燥機（CE） HGSeriesDrumDryingEquipment (CEApproved)1.概述(Description)：滾筒干燥機是一種內加熱傳導型轉動連續干燥設備

詳細介紹

輥筒刮板干燥機（CE）
HG Series Drum Drying Equipment (CE Approved)

1. 概述( Description )：
滾筒干燥機是一種內加熱傳導型轉動連續干燥設備。旋轉的滾筒通過其下部料槽，沾附著一定厚度的料膜，熱量通過管道輸送至滾筒內壁，傳導到滾筒外壁，再傳導給料膜，使料膜中的濕分得到蒸發。干燥好的物料被裝置在滾筒表面的刮刀鏟起離開輥筒，到置于刮刀下方的螺旋輸送器，通過螺旋輸送器將干物料輸送到包裝系統。
Drum dryer is a kind of rotating continuous drying equipment with internal heating function . Certain thickness of materials film attach to the drum from material liquid vessel under the drum. Heat is transferred to the internal wall of the cylinder through pipes and then to the external wall and to materials film, to evaporate the moisture in materials film so as to dry materials. Dried products are then scraped off by the blade fitted on the surface of the cylinder, fall down to the spiral conveyor under the blade, and are conveyed, collected and packed.

2. 特點( Featurs)：
2.1.熱效率高。因滾筒干燥機傳熱機理屬熱傳導，傳熱方向在整個操作周期中保持一致，除蓋散熱和熱輻射損失外，其余熱量全部都用于筒料膜濕分的蒸發上，熱效率可達70%-80%。
High heat efficiency. The principle of heat transfer of the cylinder dryer is heat conduction and the conducting direction keeps identical in the whole operation circle. Except heat loss of end cover and radiation loss, all heat can be used for evaporation of wet materials on the wall the cylinder. The efficiency can reach 70-80%.
2.2.操作彈性大，適用性廣。可調整滾筒干燥機的諸多干燥因素。如進料的濃度、涂料料膜的厚度、加熱介質的溫度、滾筒的轉動速度等，都可以改變滾筒干燥機的干燥效率，且諸多因素互無牽連。這給滾筒干燥操作帶來很大的方便，使之能適應多種物料的干燥和不同產量的要求。
Large operation elasticity and wide application. Various drying factors of the dryer can be adjusted, such as concentration of feeding liquid/thickness of material film, temperature of heating medium, rotating speed of the drum etc. which can change drying speed of the under dryer. As these factors have no interrelations each other, it brings great convenience to dry operation and makes it applicable to dry various materials and to meet different requirements of production.
2.3 .干燥時間短。物料的干燥周期一般只有10-300秒，適合于熱敏性物料。若將滾筒干燥機設置在真空器中，則可在減壓條件下運行。
Short drying period. The drying period of materials is normally 10 to 300 seconds, so it is suitable for heat-sensitive materials. It also can be pressure reducing operated if it is put in vacuum vessel.
2.4 .干燥速率大。由于涂料抹于筒壁的料膜很薄，一般在0.3-1.5mm，且傳熱、傳質方向一致，料膜表面可保持20-70kg·H2O/m2·h 的蒸發強度。
Fast drying rate. As film of materials coated on the wall of the cylinder is very thin. Normal, thickness is 0.3 to 1.5mm, plus directions of heat and mass transmitting are identical, the evaporation strength on the surface of the film can be 20-70 kg.H2O/m2.h.

3. 應用范圍(Scope of application)：

適用于化工、染料、制藥、食品、冶金等行業液體或較粘稠物料的干燥，如變性淀粉，麥片，玉米片等物料的干燥。

適用于需要將原料破碎成顆粒，篩網的孔徑一般在10 -20mm 。

It is suitable for drying liquid raw materials or thick liquid in chemical, dyestuff, pharmaceutical, foodstuff, metallurgy and so on industries. For modified starch , wheat flakes (oatmeal) , corn flakes ,etc…

4、技術參數Technical parameter

型號 Model	輥筒尺寸 Drum size mm	有效換熱面積effective heating area m2	蒸發量 Drying capacity kg·H2O/m2·h	蒸汽耗量 steam consumption Kg/h	電機功率power of motor kw	外形尺寸 Mesurement L×W×H mm	重量weight kg
HG-600	Φ600×800	1.12	40-70	100-175	2.2	1700×800×1500	850
HG-700	Φ700×1000	1.65	60-90	150-225	3	2100×1000×1800	1210
HG-800	Φ800×1200	2.26	90-130	225-325	4	2500×1100×1980	1700
HG-1000	Φ1000×1400	3.30	130-190	325-475	5.5	2700×1300×2250	2100
HG-1200	Φ1200×1500	4.24	160-250	400-625	7.5	2800×1500×2450	2650
HG-1400	Φ1400×1600	5.28	210-310	525-775	11	3150×1700×2800	3220
HG-1600	Φ1600×1800	6.79	270-400	675-1000	11	3350×1900×3150	4350
HG-1800	Φ1800×2000	8.48	330-500	825-1250	15	3600×2050×3500	5100
HG-1800A	Φ1800×2500	10.60	420-630	1050-1575	18.5	4100×2050×3500	6150