一、工作原理及應用范圍介紹  Introduction of Working Principle and Scope of Application

CH槽型強制攪拌混料機系采用U型容器中心設S形精致強制攪拌器來強化要混合物料之間的混合強度，從而達到高效、適用、均勻混合之目的。CH型混合機廣泛用于混合粉狀或濕性物料，使不同比例主輔料混合均勻。廣泛適用于制藥、化工、食品等行業。

For the CH groove-type forced stirring mixer, the U-shaped container is set with S-shaped forced stirrer in the middle to strengthen the mixture strength of materials to be mixed, thus to reach the high efficiency, and applicable and uniform mixing. CH mixer is widely applied in the mixing of powder or wet materials to uniformly mix main and auxiliary materials at different proportions, and applicable for pharmacy, chemical and food industries.

二、特點Characteristics

1. 本機與物料接觸處均采用不銹鋼制造，漿葉與桶身間隙小，混合*，攪拌軸兩端設有密封裝置，能防止物料外泄。

2.   攪拌混料軸為通軸設計，保證攪拌與倒料的同軸性與可靠性，同時攪拌槳葉為整厚板材精加工的S形結構，確?；炝暇鶆?、耐用。

3.   料斗采用點動控制，出料方便。

1. Parting contacting with the materials are made from stainless steel; there is little gap between the blade and cylinder and no dead angle for mixing; both ends of the stirring shaft are set with sealing devices to prevent the material leakage.

2. The stirring mixing shaft is designed as a through shaft to ensure the coaxality and reliability of stirring and dumping; the stirring blades are in S-shaped structures manufactured by whole thick plates to ensure the mixing uniformity and durable property.

3. The hopper is under the point control, resulting in convenient discharge.

三、技術參數（下表中數值僅供選型時參考）

Technical parameters (the values in the table below are for reference in type selection only)

四、外形簡圖Dimension sketch

槽型混合機