PP/PE濾袋(產品特點)PP/PE fiter bag (produc fatures)
1.使用符合FDA要求的衛生級過濾材料，不含硅污染。
2.單層深層過濾結構。
3.1~200微米精度范圍，公稱精度。
4.廣泛的過濾材料化學兼容性。
5.過濾材料表面經過專業防纖維游離光潔處理。
6.截渣量大，使用壽命長。
7.建議更換壓差為0.10MPa,使用不應超過0.16MPa。
1.Use sanitarygradefilter materials that meet FDA requirements,fre ofsilicon contamination.
2.Single-layer deepfitration structure.

3.Precision range i to 200 microns,nominal precision,
4.Extensive chemical compatibility of filte materials.
5.The surface ofthe filter material hasbeen treated to prevent fiber shedding,
6.Large dirt-holding capacity and long service life.
7.Recommended replacement presure difference of0.10 MPa,the use should notexceed0.16MPa.

NO尼龍濾袋(產品特點)NONylonflter bag(Product fcatures)
1.所用吸油材料為普通吸油袋的數倍，可快速吸附數倍于自身材料重量的各類油脂。
2.使用符合FDA要求的衛生級過濾材料，不含硅污染。
3.高強度單絲網，可酌情重復使用。
4.35～800微米精度范圍。
5.建議更換壓差為0.10MPa,使用不應超過0.16MPa。
6.建議使用流量一號袋每小時十噸，二號袋每小時二十二噸。
1.The oil absorpion material used is several times ofthe ordinary oil absorption bag,which canquickly absorb various kinds ofgrease several times the weightofits own material.
2.The sanitary-grade filter material that meets FDA requiremens is used,which does not containsilicon pollution.
3.High-st monofilament mesh,which can be reused as appropriate.
4.The precision range is 35 to 800microns.
5.Itis to replace the pressure differenc at 0.10 MPa,ａnd the use should not exceed 0.16 MPa.

6.It is recommended use aflow rate of ten tons per hour for bag number one and twenty-two tons perhour for bagnumber two.

AC活性炭濾袋(產品特點)ACactivated catonflier bg(produtfeatures)
1.對一系列有害生物化學物質具有優異的吸附性能，被廣泛用于去除水中的氯，有害生化物質和異味，攔截石棉等細微有害雜質，濾除水銀和鉛等有害重金屬。
2.活性碳顆粒散裝，不使用任何粘接劑，保留了碳粒表面積；對有害物質的吸附速度比普通擠壓成型碳棒或碳濾紙數倍以上。
3.每一只標準二號袋內裝五公斤具有高開孔率的椰殼活性碳顆粒。
4.椰殼活性碳顆粒已經過予沖洗，使用前只需三十秒沖洗，以排除在運輸過程中磨擦析出的微量碳粉。
5.不等密度深層過濾結構，優異的容納雜質能力。
6.全部使用符合FDA要求的衛生級過濾材料，不含硅污染。

7.作業中無碳顆粒，纖維及析出物游離出。
8.建議使用流量一號袋每小時六噸，二號袋每小時十二噸。
9.建議更換壓差為0.12 Mpa,使用不應超過0.25 Mpa。
1.It has exelet adsorption performance for a series ofharmfulchemical substances and is widely used toremove chlorine,harmful biochemical substancesodors from water,intercept asbestosａnd other fine harmfulimpurities,ａnd filter out harmful heavy metals such as mereury and lead.2.The activated carbon particles are,without any binder,which retains the surface area ofthe carbon particles;the adsorption speed of harmfulsubstanes isseveral times faster than that of ordinary extruded carbon or carbon filter paper,
3.Each standard No.2 bag contain five kilograms ofactivated carbon particles with high porosity from coconut shells.4.Theactivated parielesfrom coconut shells have been pre-washecd,andonly need to be washed for thirty seconds before use to remove the trace amount ofcarbon powcder that is frictionally during transportation.
5.The deep filtration structure with unequal density hasexcellent capacity to accommodate impurities.
6.All the filtering materials used meet the FDA reguirements and free ofsilicon pollution.7.There is no carbon partiele,fiber and leaching during operation.
8.It is ecommended to use a flow rate of6per hour for No 1 bag and 12 tons per hour for No.2bag
9.Itis recommended to replace thepresuredfferenceof.12 Mpa,ａnd the use should not exceed 0.25Mpa.

0A除油濾袋(產品特點)OA oil removlflterbg (product fatures)
1.高效吸油能力，可快速吸附高達數倍于自身材料重量的各類油脂。2.全部使用符合FDA要求的衛生級毛細纖維過濾材料。
3.多層復合深層過濾結構。4.雙重效用，吸油與攔截雜質。
5.1~100微米精度范圍，公稱精度。
6.廣泛的過濾材料化學兼容性。
7.過濾材料表面經過專業防纖維游離光潔處理。
8.截渣量大，使用壽命長。
9.更換壓差為0.10MPa,不應超過0.16Mpao
1.Eficientoilabsorption capacity,can quickly absortb up to several tmes the weightofitsown material
of various oils and fats.
2.All anitary capilary fiberfitration materialsthat meet FDA requirements are used.
3.Mult-layer composite deep filter structure.
4.Dualeffect,oilabsorption and impurity interception.5.1-100 micron accuracy range,nominal accuracy.
6.Extensive chemical compatibilityof filter materials.7.The surface of the filter material is treated with professional anti-fiber free polishing.
8.Large amount of slag.longservicelife.
9.The best replacement pressurediference is 0.10MPa,ａnd the maximumshould not exceed 0.16Mpa.

SEM除水濾袋(產品特點)SEM dewatering filter bag(product features)
1.除水能力：可快速吸收并截留高于材料自重數倍的水份。
2.雙重效用：除了除水功能，還具有攔截固體雜質的功能。
3.精度等級：1,5,10,25和50微米。
4.過濾效率：公稱精度，一次濾過雜質攔截率為85%。
5.過濾材料表面處理：經過專業防纖維游離處理。6.材料等級全部使用符合FDA要求的衛生級過濾材料。
7.過濾流量大，壓差低；截渣量大，使用壽命長。8.建議更換壓差為0.12Mpa,不應超過0.18Mpao。

1.Water removal capacity:canquickly absorb and retain several timesthe weight of water abovethe material's own weight.
2.Dual function in addition to the water removal functio,italso has the function ofintercepting solid impurities.
3.Accuracy grade:1,5,1025,ａnd 50 microns.
4.Filtration eficiency:noinal accuracy,one-time filtration ofimpurities interception rate of85.5.Filtration material surface treatment:hasbeen professionally treated to prevent fiber liberation.
6.Material grade alluse food-grade filtration materials that meet FDA requirements.Large fltration flow,low pressurediffrence.
7.Largeamount ofresidue interception,long service life.
8.Recommended replacement presurediferenc is0.12Mpashoud not exced0.18Mpa maximum.