當前位置：上海博曼泵業有限公司>>>>SBM型雙吸離心泵(一)

SBM型雙吸離心泵(一)

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地上海

在線詢價 收藏產品

聯系方式：楊凱查看聯系方式

更新時間：2025-03-10 07:44:02瀏覽次數：185次

聯系我時，請告知來自制藥網

產品分類 品牌分類

暫無信息

上海博曼泵業有限公司

經營模式：經銷商

商鋪產品：32條

所在地區：上海

聯系人：楊凱（銷售經理）

詢價 給他留言

產品簡介

一、概述SBM型泵系單級、雙吸、泵殼中開、蝸殼式臥式離心泵，供吸送未處理水、清水和非飲用水以及碳?xì)浠衔?，被吸送液體溫度可達105℃

詳細介紹

一、概述

SBM型泵系單級、雙吸、泵殼中開、蝸殼式臥式離心泵，供吸送未處理水、清水和非飲用水以及碳?xì)浠衔铮晃鸵后w溫度可達105℃。

SBM型泵的流量為68～11000米³/時，揚程為7～200米，適用于自來水、灌溉、排水泵站、電站、工業供水系統、消防系統、船舶工業，亦適合煉油工業中一般用途。

型號意義：

二、結構說明

SBM系列泵為單級雙吸軸向中開蝸殼式離心泵，可供臥式或立式安裝，臥式泵的驅動端可根據需要設置在泵的左側或右則，也就是同一轉子部件可用于順時針、逆時針兩個方向。

SBM型泵的主要零部件有：泵體、泵蓋、葉輪、軸、密封體、泵體密封環、軸套、軸承部件與聯軸器部件等。

泵殼制成水平中開，泵的吸人口與吐出口

I. GENERAL

Series SBM pumps are single stage, double suction with horizontally split casings. They are suitable for pumping unsettled water, clean water, non-drinkable or hydrocarbon at a temperature not exceeded 105℃.

Series SBM pumps are available for capacities of 68-11O00m³/Hr and heads of 7 -200m.they are adoptable in water works, irrigation and drainage pumping stations, power stations, industrial water supplp systems, fire fighting systems, arine applications as well as general applications in refineries, etc.

The nomenclature of the model is based on its size and characteristic. For example:

Ⅱ. CONSTRUCTION

Series SBM pumps are single stage, axially split volute casing pump with double flow radial impeller, for horizontal and verical installation. Drive shaft end of the horizontal pump can be optionally on the left or right side.

The main components of SBM pump are listed as follows: lower half casing, upper half casing,impeller, shaft,wearing rings,shaft sleeves, bearing housings and couplings.

The volute casing is splited on the horizontal center line with the suction and discharge nozzles cast integral with the lower half. The upper casing is accurately located on the lower half by the use of dowel pins. It can be removed to inspect the interior of the pump without disturbing the pipe connections or pump