-- 工作原理 --

Working principle

無軸螺旋輸送機由驅動裝置、無軸螺旋體、螺旋管、耐磨襯板、進出料口、蓋板、支架等組成。物料從進料口進入螺旋管,利用螺旋體與物料的摩擦力及無軸螺旋體的軸力將物料輸送到出料出,適合于長距離輸送作業。

WS-LS type shaft less screw conveyor comprises of driving device, Screw body, Spiral pipe, wear-resistant line inlet and outlet cover, a support frame. The material are fed through tube inlet. The material is transported to outlet by friction between material and the spiral body and the axial force of the screw auger, mainly suitable for conveying operation in long distance.

-- 技術參數 --

Technical Parameter

WLS系列無軸螺旋一般使用在物料粒度大于60mm、磨琢性強、粘性、易結塊、易纏繞、傾角不大于25度的場合。優點在于長度較長時不需吊掛軸承,減少了維護。以上數據是在粘性膏狀物料、填充系數0.2的前提下得到的。

WLS series shaftless screw conveyor is generally used in applications where the material Size is larger than 60mm, strong abrasion, viscous, easy to agglomerate, easy to entangle, and the angle of inclination is no more than 25 degrees. The advantage is that there is no need to hang the bearings when the length is long, which avoids frequently maintenance. The above data is based on the premise of a viscous paste material with a filling factor of 0.2.