L.ADU PNEUMATIC

L.ADU PNEUMATIC
L.ADU基礎

LADU氣動直角

LADU Pneumaticinline

LADU Pneumaticgrip

LADU氣動

L.ADU BASIS RIGHT-ANGLED
有3種不同的電機版本可供選擇：55,56和57型
電機版本類型取決于所需的孔尺寸和材料堆疊
為了獲得更多的功率，還可以安裝渦輪電機
選擇合適的鎖定系統后，機器即可使用
LADU氣動

L.ADU BASIS INLINE
有3種不同的電機版本可供選擇：55,56和57型
電機版本類型取決于所需的孔尺寸和材料堆疊
為了獲得更多的功率，還可以安裝渦輪電機
選擇合適的鎖定系統后，機器即可使用
LADU氣動

L.ADU BASIS GRIP
有兩種不同的電機版本：55型和56型
電機版本類型取決于所需的孔尺寸和材料堆疊
為了獲得更多的功率，還可以安裝渦輪電機
選擇合適的鎖定系統后，機器即可使用
L.ADU鎖定系統

LADU氣動同心夾頭

LADU PneumaticTwistLock

LADU PneumaticC-Frame

LADU PneumaticTaperlock

LADU PneumaticTraverse

LADU PneumaticGeared Offset

LADU氣動

同心套（CC）
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和反補丁
幾乎100％的芯片和粉塵排放
高達700 N的鎖模力
LADU氣動

扭鎖
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和反補丁
可選芯片和灰塵排氣
沒有夾緊力
Kann hoheVorschubkräfteaufnehmen
帶有集成的快速更改索引
LADU氣動

C-FRAME
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和counters孔
幾乎100％的芯片和粉塵排放
高達1.200 N的鎖模力
定位überPilotspitze im Gegenhalter
Bohrwerkzeug mit Pilotspitze或Bohrschablone
P型：Aufklappbarer Gegenhalterfüreinfache Positionierung | Materialschichtstärke：0-100毫米
J型：Kein aufklappbarer Gegenhalter，Bauteilklemmung durch Parallelhub | Materialschichtstärke：5-40毫米
LADU氣動

TAPERLOCK（TPL）
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和反補丁
幾乎100％的芯片和粉塵排放
沒有夾緊力
LADU氣動

真空導線（VT）
材料堆疊：CFRP |鋁
一次性鉆孔和counters孔
幾乎100％的芯片和粉塵排放
高達1.000 N的夾緊力
LADU氣動

GEARED OFFSET（GO）
材料堆疊：CFRP |鈦|鋁
一次性鉆孔和counters孔
可選芯片和灰塵排氣
沒有夾緊力
L.ADU選項

LADU氣動圓形計數器

LADU PneumaticMQL-系統

LADU PneumaticSine-Feed

LADU Pneumatic快速更換系統

LADU Pneumatic快速更換索引

LADU氣動雙手握

LADU氣動

周期計數器
計算鉆井周期
數字LED顯示
鉆井周期信息導致的預防性維護
用磁針重置計數器
更多關于L.ADU選項

LADU氣動

MQL系統
為了*的鉆孔和表面質量
 質量的冷卻液
恒定的微滴進料
冷卻液量可以單獨調整
易于補充
更多關于L.ADU選項

LADU氣動

SINE-FEED
LübberingsMirco-Peck解決方案正弦饋送將長芯片分解成微芯片
微芯片提供 的鉆孔質量
LübberingsSine-Feed甚至可以使用一次性鉆孔和counters孔
名稱“正弦進給”代表正弦波如主軸振動
將組裝到基礎機器中
也可以使用MQL系統（干式切割）
更多關于L.ADU選項

LADU氣動

快速更換系統
由于統一的界面，鎖定系統快速切換
良好的切割工具（如清潔）
低損傷 風險
更多關于L.ADU選項

LADU氣動

快速更改索引
與集成的快速更換系統快速更換鎖定系統
附加值：機器360°旋轉
只需拉動，轉動并釋放 - 機器就鎖定在所需的位置
輕松和舒適的處理
更多關于L.ADU選項

LADU氣動

雙手抓
雙手gip - 理想的高空作業
可用于基礎機器的內聯版本
更多關于L.ADU選項

L.ADU氣動 - 模塊標準程序
由于采用模塊化結構，可以單獨配置
3個基準機器，6個鎖定系統和6個附加選項的結果是超過100種不同的可能組合
根據鉆孔尺寸和工藝的不同，有不同的型號（直角，直列，夾緊）和電機類型（55,56,57型）
基礎機器（L.ADU基礎）與鎖定系統（L.ADU鎖定系統）一起準備使用
模塊化概念提供舒適的附加選項（L.ADU選項）
由于統一的接口（L.ADU快速更換系統），鎖定系統可以快速輕松地進行更改。
低維護：磨損和備件的 要求（<10％）
優化鉆孔質量：CFRP中不會出現分層 - 無鉆孔鉆孔

right-angled

inline

grip

L.ADU BASIS RIGHT-ANGLED

• available in 3 different motor versions: type 55, 56 and 57
• motor version type depends on required hole size and material stack
• for more power a turbine motor can also be fitted
• after selecting a suitable locking system, the machine is ready to use

L.ADU BASIS INLINE

• available in 3 different motor versions: type 55, 56 and 57
• motor version type depends on required hole size and material stack
• for more power a turbine motor can also be fitted
• after selecting a suitable locking system, the machine is ready to use

L.ADU BASIS GRIP

• available in 2 different motor versions: type 55 and 56
• motor version type depends on required hole size and material stack
• for more power a turbine motor can also be fitted
• after selecting a suitable locking system, the machine is ready to use

L.ADU locking systems

Concentric-Collet

TwistLock

C-Frame

Taperlock

Traverse

Geared Offset

CONCENTRIC COLLET (CC)

• material stacks: CFRP | titanium | aluminium
• one-shot drilling and countersinkung
• nearly 100 % chip and dust exhaust
• up to 700 N clamping force

TWIST LOCK

• material stacks: CFRP | titanium | aluminium
• one-shot drilling and countersinkung
• optional with chip and dust exhaust
• no clamping force
• Kann hohe Vorschubkräfte aufnehmen
• comes with an integrated Quick Change Indexing

C-FRAME

• material stacks: CFRP | titanium | aluminium
• one-shot drilling and countersinking
• nearly 100 % chip and dust exhaust
• up to 1.200 N clamping force
• Positioning über Pilotspitze im Gegenhalter
• Bohrwerkzeug mit Pilotspitze oder Bohrschablone
• Type P: Aufklappbarer Gegenhalter für einfache Positionierung | Materialschichtstärke: 0-100 mm
• Type J: Kein aufklappbarer Gegenhalter, Bauteilklemmung durch Parallelhub | Materialschichtstärke: 5-40 mm

TAPERLOCK (TPL)

• material stacks: CFRP | titanium | aluminium
• one-shot drilling and countersinkung
• nearly 100 % chip and dust exhaust
• no clamping force

VACUUM TRAVERSE (VT)

• material stacks: CFRP | aluminium
• one-shot drilling and countersinking
• nearly 100 % chip and dust exhaust
• up to 1.000 N clamping force

GEARED OFFSET (GO)

• material stacks: CFRP | titanium | aluminium
• one-shot drilling and countersinking
• optional with chip and dust exhaust
• no clamping force

L.ADU options

Circle-Counter

MQL-System

Sine-Feed

Quick Change System

Quick Change Indexing

Two-Hand-Grip

CYCLE COUNTER

• Counts the drilling cycles
• Digital LED display
• Preventive maintenance due to drill cycle information
• Reset the counter with the magnetic pin

More about L.ADU options

MQL SYSTEM

• For perfect drilling and surface quality
• Highest quality of coolant
• Constant feed of micro drops
• Quantity of coolant can be individually adjusted
• Easy to refill

More about L.ADU options

SINE-FEED

• Lübberings Mirco-Peck solution Sine-Feed breaks the long chips into micro chips
• Micro chips for perfect drilling quality
• Lübberings Sine-Feed is even possible with one-shot drilling and countersinking
• The name "Sine-Feed" stands for sine like spindle vibrations
• Will be assembled into the basis machine
• Also with MQL System possible (dry cutting)

More about L.ADU options

QUICK CHANGE SYSTEM

• Quick changeover of locking systems due to uniform interface
• Good access to the cutting tool (e.g. for cleaning)
• Low risk of damaging the cutting tool

More about L.ADU options

QUICK CHANGE INDEXING

• Quick exchange of locking systems with the integrated Quick Change System
• Additional value: 360° rotation of the machine
• Just pull, turn and release - and the machine is locked in the desired position
• Easy and comfortable handling

More about L.ADU options

TWO-HAND GRIP

• Two-hand gip - ideal for overhead work
• Available for inline version of the basis machine

More about L.ADU options

L.ADU PNEUMATIC – MODULAR STANDARD PROGRAM

• Can be individually configurated thanks to the modular structure
• The outcome of 3 basis machines, 6 locking systems und 6 additional options is over 100 different possible combinations
• Depending on the drilling size and process there are different models (right-angled, inline, grip) and motor types (type 55, 56, 57) available
• The basis machine (L.ADU basis) is together with the locking system (L.ADU locking system) ready to use
• The modular concept offers comfortable additional options (L.ADU options)
• The locking systems can be changed quickly and easily due to a uniform interface (L.ADU Quick Change System)
• Low maintenance: Minimum requirement of wear and spare parts (< 10%)
• Optimised Drilling Quality: no delamination in CFRP - burrless drilling
• Enormous time saving thanks to one-shot drilling and countersinking
• 品牌   型號
  COREMO  C_A074_KC52_3125403-M6017_DLZ001_EN_S1_R00_AP_A2 TYPE:D-3N A2606 LEFT HAND  
  COREMO  C_A074_KC52_31421016-M1026_DLZ001_EN_S1_R00_AP_A2 reference:D2N-30/4-RH  
  Parker  DXD06032  
  JOSEF EMMERICH   510SPPH 32521-aag-ck-032274  
  MSC Tuttlingen GmbH   type: CC12-V ID:6335274  
  Haegglunds  FG3777721  
  lubbering  80241504  
  lubbering  80280101  
  lubbering  80341103  
  lubbering  70280501  
  lubbering  70280502  
   

  優勢供應德國LUBBERING，LUBBERING裝備工具，手持槍輸出頭、LUBBERING擰緊裝配偏置工具、LUBBERING特殊頭,LUBBERING開口頭、LUBBERING閉口頭、LUBBERING擰緊槍頭

  LUBBERING擰緊裝配偏置工具    LUBBERING擰緊裝配偏置工具    LUBBERING擰緊裝配偏置工具

  SPECIAL OPEN HEAD|89131405 
  >luebbering SICOPOINT9090
  >luebbering 89541202
  >LUDWIG LEUCHTEN KG | moisture-proof light|BJ18 /TYPE 135NS GP; 1XT58 W >LEUCHTS;komp WG Does L58/84;230V/50Hz
  >LUDECKE ESD9TLAB
  >LUDECKE ESD14NA
  >LUBE Card sets _207254, ??8
  >lubbering  13MM sleeve gear 70914320
  >lubbering  80280101
  >lubbering 70280501
  >lubbering  80241504
  >LUBBERING SPECIAL OPEN HEAD|89131405
  >LUBBERING sicopoint 9000
  >LUBBERING 85134365
  >LUBBERING 80929264
  >lubbering 80341103
  >lubbering 80341103
  >lubbering 80280101
  >lubbering 80241504
  >lubbering 70280502
  >lubbering 70280502
  >lubbering 70280501