德國Armatherm Guenthel GmbH 溫度計

德國Elliptec Resonant Actuator AG 馬達 驅動執行器

瑞典eletta艾力塔 流量計 壓力變送器液位計E

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

瑞典eletta艾力塔 流量計 壓力變送器 液位計

S0-series – robust, mechanical flow indicator

S0 is a mechanical flow indicator. It is identical with our S2/S25, but this model does not have any micro swithes. It will be used as a direct reading flow monitor within the chosen measuring range. As option you can have the scale direct reading in ie; m3/h, GPM aso.

The price is a little bit lower than for the S2/S25 and you will have a very robust flow indicator for harsh environments.

Type of document

Available languages

Shortform manual V S R A-series

Manual S-series

Measuring ranges V-, S-, R- and A-series

Leaflet S-series

Product overview

SP-G - liquid Flow Switch

Our flow switch SP-G is designed to fit small flow and line sizes. It works on the principle of variable flow area where the alarm switch point can be set at a very low flow and still the switch is capable of handling large flows without creating a large pressure drop.

SP-G comes in dimensions DN15 and DN20. You have the possibility to chose the set point from 1,5 l/min up to 30 l/min. The set point is calibrated from factory but can be changed by exchanging the pressure plate.

SP-G has a mechanical micro-switch. You can install it horizontal or vertically. Another feature is that the outlet can be rotated 90º or 180º with respect to the inlet. This gives you good alternatives in places where space is very limited.

Type of document

Available language

Leaflet SP-G SP-GA EF-G

Product overview

SP-GA - liquid Flow Switch

SP-GA Flow Switch is designed to give an initial alarm at a very low flow and still be capable of allowing a high full liquid flow passing through when pumps or valves are activated by the micro switch. The function is based on fluid flow activation only and threfore it is not affected by changes in static pressure.

SP-GA comes in dimension DN40. You can use reductions for to have it in DN32 or DN25. Filters are available as option.

SP-GA has a mechanical micro switch. You have the possibility to chose a set point from 3 l/min up to 70 l/min. The set point is calibrated from factory and can be adjusted in field. Maximum flow is approximay 300 l/min.

Type of document

Available languages

Leaflet SP-G SP-GA EF-G

Product overview

EF-G - liquid Flow Switch

EF-G is recommended in applications where low signal point can be combined with large flows passing without creating a large pressure drop.

EF-G comes in dimensions DN15 and DN20. The maximum flow is appr. 70 l/min and you have the possibility to chose the set point from 1,5 l/min up to 30 l/min.

EF-G has an inductive sensor. Process pressure up to 100 bar. The outlet can be rotated 90º or 180º with respect to the inlet which gives an installation of limited space.

Type of document

Available languages

Leaflet SP-G SP-GA EF-G

Product overview

PR1 – liquid Flow Switch of paddle-type

PR1 liquid Flow Switch is suitable for applications with limited demands on accuracy. Its speciality is full flow or no flow. The lowest possible set point in a 50 mm pipe is appr. 100 l/min, the set point increases accordingly with larger dimensions. It can be mounted on pipe-sizes from DN50 up to DN250, the process connection is 25mm thread (through pipe wall).

The paddle aligns fully with the flow and creates a very small pressure drop.

Type of document

Available languages

Leaflet PR1

Product overview

The Elliptec Motor X15G is based on the inverse piezoelectric effect.

A microcontroller and two tiny transistors are all that is needed to supply the piezoelectric ceramics with a sufficient voltage to make the ceramics expand by less than one micrometer, and to let it contract again when the voltage is cut off. During motor operation, this process occurs about 100’000 times per second.

&wrap= |&md5=5d9bfbd88f1db24ca9c532326850c15f','thePicture','width=800,height=583,status=0,menubar=0'); return false;" target=thePicture>

The geometry of the resonator enhances the vibration of the piezoelectric ceramic and translates it into elliptical motion at the motor tip.
A spring maintains a steady force between the resonator tip (aka the stator) and a driven element (aka the rotor), which in turn moves by up to a few micrometers with every oscillation of the piezo. Because this process occurs at ultrasonic frequencies, the motion of the driven element is continuous and smooth.

The Elliptec Motor is the right choice not only for simple applications where continuous linear or rotational movement is required, it also satisfies the demand for highly dynamic motion of the highest precision. The Elliptec Motor is unaffected by adverse environments like vacuum conditions. Many applications can utilize the standard model X15G, but customer specific motors can be manufactured on demand.
(Engineering Customization)

Download: X15G Animation
                  Datasheet X15G

 Bimetall dial thermometer | various applications | Structure group 10

 Bimetal dial thermometers | chemical execution | Structure group 11

 Thermometers | gas-filled | Structure group 30

 Protective sleeves | Structure group 40

 Industrial | Thermometers Glass | Structure group 50

 Glass scale Thermometer | Structure group 60

 Measuring Instruments | for meat | Structure group 63

 Multi Range Manometers | Structure group 70

 Precision Manometers | Structure group 71

 Manometer Accessories | Structure group 72

 Swimmingpool and Sauna | Structure group 75

 Temperature push-in probes | Structure group 79

 Acid proof tester | Anti freeze tester | Structure group 80

Structure group 10 Bimetal dial thermometers | Structure group 10   nominal size 33, 40, 50, 63, 80, 100, 160 mm measuring technique huminity as datasheet 10 wide range of diverse applications protective sleeves as structure group 40     Product description Page 1.0   Product description Page 1.1           Bimetal dial thermometers nominal size 63 to 160       horizontal mounting, with protective sleeve Page 3.0   horizontal mounting, with protective sleeve simple execution Page 3.1   vertical mounting, with protective sleeve Page 4.0           Bimetal dial thermometers nominal size 63 to 160         horizontal mounting, with threat industrial execution Page 5.0   vertical mounting, with threat industrial execution Page 6.0           Bimetal dial thermometers nominal size 63 to 160       horizontal mounting, sliding on stem flange or rear fixing flange, for air conduit Page 7.0           Bimetal dial thermometers nominal size 33 and 50       horizontal mounting, with threat Page 8.0           Bimetal dial thermometers nominal size 50 to 100       clamp on thermometers for surfaces Page 9.0           Shank hygrometer, nominal size 100       horizontal mounting for air conduit Page 10.0           complete datasheets download