德國BEKO TECHNOLOGIES GmbH 過濾器 測量控制儀器

德國KTC Handhabungstechnik GmbH 工具 抓手

德國Gefeg-neckar電機 齒輪 電子產品 控制模塊 編碼器 剎車片

德國Voigt electronic GmbH PCB 電路板

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

產品系列：

SMD assembly

Your boards are assembled on state-of-the-art, high-precision and highly flexible pick-and-place machines.

The annual maintenance of our systems guarantees a constant level of accuracy across the entire component spectrum from the chip size 0201 to the BGAs with an edge length of 50 x 50 mm. The assembly rate is max. ca 35,000 units per hour. It should also be noted that the entire spectrum of state-of-the-art components can be assembled, e.g. BGAs, µBGAs, CSPs, QFNs or QFPs.

Full convection reflow soldering

Full convection reflow soldering is the soldering process most frequently used in the electronics production line. For soldering in the SMD production line Voigt electronic uses a reflow soldering system from Rehm Thermal Systems.

The use of forced convection for circulating airflow guarantees optimum process security. The temperature-stability is +/- 1K. Both air and nitrogen can be used as a transport medium for the thermal energy.

Naturally our systems are also suited for higher temperatures in the processing of lead-free solders and have sufficient reserve capacity for boards with high thermal requirements.

THT assembly

The THT assembly takes place on state-of-the-art ergometric workstations. Continuous ESD protection is just as much a matter of course as the use of the latest manual soldering equipment from ERSA. Programming and interlocking can be used to ensure that optimum parameters are always applied, even in the case of manual soldering.

Wave soldering

For the soldering that takes place after the THT assembly two wave-soldering systems from Kirsten Soldering AG. are used. The patented jet wave of the soldering systems guarantees the flawless and gentle processing of subassemblies with a maximum width of 400 mm.

The negative pressure generated by the flow of the solder is exerted in a gentle but constant manner on the components on the top side of the PCBs. Thus they remain in position and do not rise up, as is usually the case with other systems using Wörthmann or double wave. Perfect results with special masks are also achieved with selective soldering processes – both with leaded and unleaded solders.

Selective soldering

Selective soldering is a process used for the firm bonding of components and PCBs. In contrast to wave soldering, the power and the soldering aids are provided locally. This facilitates the subsequent soldering of THT components on pure reflow assemblies, the soldering of PCBs with THT components mounted on both sides, and the gentle processing of temperature-sensitive components.

The process used is selective soldering with the point shaft. This involves moving the solder pot with the point shaft under the subassembly to be soldered. The conventional components are soldered under nitrogen atmosphere. The advantages for you are reproducible soldering joints, compley soldered PCBs, and subassemblies that have been manufactured under the right technological conditions.

Repair workstation

To repair multipolar SMD components or BGAs and Quad Flat No-Lead (QFN) packages, we use an ERSA repair workstation which enables defective components to be automatically unsoldered with the aid of a control program and new switching circuits to be placed. The monitoring of the top side of the components and the temperature of the PCBs ensures a controlled process.

Painting of subassemblies

In order to protect subassemblies against damage or malfunctioning caused by damp or deposits, more and more users are beginning to provide their subassemblies with a protective coating of paint.

Voigt electronic paints subassemblies compley or selectively by means of an NC spray valve with a programmable spray range of 350 x 450 mm. If the thickness of the paint or the coat of paint under components has to meet more exacting requirements, we can offer a selective dipping method.

Simulating the environment by changing storage temperatures (burn-in)

Subassemblies which have to function reliably under particularly critical environmental influences can be subjected to changing storage temperatures after they come off the production line.

Here the climatic chamber has a volume of 240 l. Depending on the test run the temperatures can be varied between -40 and 180° C. The climatic chamber also has a cable duct to enable external measuring devices to be connected. In addition, all readings can be archived.

產品系列：

電機

Motors:

DC Motors

DC motors with permanentmagnets and mechanical current commutators.

Brushless DC Motors

Brushless DC motors for electronic current commutation with hall sensors.
The commutation electronics can be either external or integrated (see inligent drive systems).

Inligent Drive Systems

From our inligent drive systems you can choose between brushless DC motors and brushed DC motors.
Both with integrated control electronics and bus interface.

AC Motors

Our single phase and three phase motors are 2- and 4-pole asynchronous motors for use at AC power supply.

Universal Motors

Universal motors are collector motors which can be used for DC or AC current supply.

齒輪

Gears:

Spur Gears

Our spur gears are designed for a high efficiency. They are available in 2 - 6 stages. The spur gears can be combined with all our motor types.

Worm Gears

Worm gears for 90° force direction change with shaft center distances from 17 mm up to 40 mm. The worm gears can be combined with all our motor types.

Planetary Gears

Our planetary gears are designed for a high efficiency. They are available with 1-4 stages. The planetary gears can be combined with all our motor types.

電子產品

Electronics and Accessories:

Controll Units (external)

Our control units are 4-Q-Controllers. They are based on the electronc platform of the integrated controllers (compare MC motors).
They all have a CANopen interface and can be used for DC motors and brushless DC motors.

Encoders

Our incremental encoders are compatible with all our motors. They are available in different types from 50 up to 1024 pulses. Special types are available on demand.

Brakes

Fail-safe brakes for use with AC or DC current. Current on brakes available on demand.
Our brakes are compatible with all our motors.

Products

	Tool changer for horizontal and vertical machines		Tool changer systems for work pieces and tools
	Tool changer ATC 20/HSK-A63-T-H		Pick up-Magazine with 33 places HSK-A63/SK40
	ATC-RAPIDO 63		Pick-up and gripper
	Gripper - for different tools

Products:
Tool changer for horizontal and vertical machines

Standard division of the chain: 140 mm other pitches on request Tools: HSK-100 / SK50 / CaptoC8 HSK-63 / SK40 / CaptoC6 Capacity: 40 until 120 magazine places Change unit: Double gripper unit 180°rotating, gripper hydraulic operated. Applicable for horizontal and vertical spindle. Gripperhead moved by linear unit or 90°camguide.

Products:
Tool changer ATC 20/HSK-A6-T-H

Tool changer consisting of: Disc magazine with 20 magazine places HSK-A63, driven by a servo motor Transmitter and change unit that‘s turn and vertical movements are controlled by a curve. PERFORMANCE STRENGTH AND ABSOLUTE RELIABILITY!

Products:
ATC-RAPIDO 63

Tool: HSK-A 63 Function: Turn and vertical movements curve navigated Optimal motion cycles Driven by servo and three-phase alternating current motor. Low expense for controlling Specially short times of changes, synchronized tool weight High positional accuracy Extremely low service expense High lifespan

Products:
Gripper - for different tools

Products:
Tool changer systems for work pieces and tools

Work piece changer: Max. diameter: 550 mm Max. length: 500 mm Max. weight: 100 kg Changing unit with double gripper and linear unit. Linear unit and swing of the double gripper with servo motor. Gripper hydraulic operated. Tool changer: Magazine: 50 places HSK-A63 modular expandable on 97 and 144 tools. Max. diameter: 140 mm Max. length: 350 mm Max. weight: 10 kg Magazine drive as a Servo axle shaped. Change unit with double grip and linear unit. Linear unit and swing of the double gripper with servo motor. Gripper with spring grip bakes, during swinging bolted.

Products:
Pick up-Magazine with 33 places HSK-A63/SK40

Magazine Chain: Chain pitch: 100 mm Chain speed: 30m/min Tool data: Diameter: 120 mm Weight: max.15 kg Length: max.300 mm Magazine drive: Servo motor

Products:
Pick-up and gripper

Automation with flexible technologies

Compressed-air filtration
Flanged and threaded filters / High-pressure filters / Activated-carbon adsorbers and filters Everything points to the CLEARPOINT® filter technology: low operating costs, long service lives, outstanding process reliability, and reliable filtration of aerosol, oil and dust. The CLEARPOINT® range of products is all-embracing. The performance spectrum stretches from 35 to 31,240 m³/h, includes threaded filters, flanged filters, and high-pressure filters up to 500 bar. The program includes new products: CLEARPOINT® V activated-carbon adsorber and filters with a cartridge. You also use other manufacturer's filters? The CLEARPOINT® filter technology is also available for many other standard filter housings.
Flanged and threaded filters   High-pressure filters   CLEARPOINT V           Up to 31,240 m³/h at 7 bar Filter management optional   High-pressure filters up to 500 bar   Activated-carbon adsorber Activated-carbon filter with cartridge

Compressed-air drying
adsorption dryer / high-pressure dryers / membrane dryers / refrigeration dryers / heat regenerated dryers Application-optimised refrigeration-, adsorption- and membrane dryers for volumes up to 1,500 m³/h have been part of the product range for years. The process reliability which is significantly enhanced by the DRYPOINT® dryer technology pays off in every company. The heat-regenerated EVERDRY® adsorption dryers, designed for large volume flows up to 20,000 m³/h, complement the product spectrum.
DRYPOINT® AC   DRYPOINT® AC HP   DRYPOINT® M           Adsorption dryers with a very short payback period   Adsorption dryers for high-pressure applications up to 500 bar     Compact and efficient membrane dryers DRYPOINT® RA, RS, RAHT, RSHP   EVERDRY®           The comprehensive refrigeration dryer range of products. The suitable solution for every task. With extremely low flow resistances.   Customer-orientated, made-to-measure plant construction

Process technology
BEKOBLIZZ® LC made by BEKO. Cools economically with cold compressed air (+5 °C). BEKOBLIZZ®. Extremely dry compressed air with constant minimum temperatures down to -45 °C offer new dimensions in plastics engineering, as regards capacity and quality. The main fields of application of thisBEKO technology lie in blow moulding, the gas injection technique (GIT), rotational sintering and thermoforming. With oil-free compressed air, the BEKO catalysis technology sets new standards in compressed-air processing. After intensive research work, BEKOKAT® implements the theoretical possibilities of this technology and connects them with the requirements of practical application at an extremely high degree of reliability.
BEKOBLIZZ® LC   BEKOBLIZZ®   BEKOKAT®           The compressed-air cooler   Optimised cooling processes with cryogenic and dry compressed air   Constantly oil-free compressed air

Compressed-air distribution
The basis for the superior properties of the BEKOFLOW® system is the material: polybutene. Therefore,BEKOFLOW® pipeworks are: resistant to all standard compressor oils temperature-resistant up to 70 °C at 10 bar for longer periods of time hygienically safe and toxicologically harmless suitable for long-term employment even at high operating temperatures
BEKOFLOW®                   The cost-reducing compressed-air pipework BEKO instrumentation and control equipment helps to save money   METPOINT OCV Monitoring system for residual oil in compressed air   METPOINT DPM Unit for dew point measurement   LEAKDETECTOR Detects each and every leak. Fast & simple. METPOINT FLM Shows you what you should be looking for   Minimum pressure valves Overrunning of compressed air treatment systems can create serious problems.