德國Kostryrka聯軸器 夾持元件

德國KINETRONIC GmbH傳感器

德國innomatec GmbH測試儀

:王工
同號
      449147851
價注意事項：
       1.請發書面詢價函（郵件，，傳真等），不接受口頭報價。
       2.如果型號不能*對上，請?zhí)峁┯⑽钠放泼?具體型號+數量。
       3.詢價的商友請主動告知公司名稱和，謝謝。

Leaktester / Leck-Measurement Computer LTC-502           The leak tester LTC-502 is the economical introduction model of our successful leak testing device series. The LTC-502 can be supplied for all leak measurement processes (pressure difference, flow, compensation and reference methods) and volume measurements       Test pressures - from vacuum to 20 bar overpressure   Leak rates - for all kinds of functional leakage tests   Test times - milliseconds, seconds and minute ranges   Test volumes - from a few millilitres up to 10 litres   Pressure differences - from 0,1 Pa to 5000 Pa   environmental conditions – with special adaptions a wide range of sectors (temperature, etc.)            Control by the user is possible, as is the user-specific adaption of the language and units of measure. A ring memory (FIFO) saves the latest 2000 measurement results. The LTC 502 can be upgraded with a wide range of mass memories, fixed discs, networks and extra bus systems. Using numerous interfaces, the LTC 502 can be integrated into fully automatic test machines and processes and is capable of running small devices directly.         The 24 Bit computing marvel with the powerful heart

	The only analog module with the 24-bit analog-digital converter allows a hitherto unparalleled solution of the measuring signal into more than 1 million phases. This means that a huge amount of extra information is available for monitoring the measuring process and ensuring that the measurements can be reproduced as accuray as possible.

		Good contactual characteristics and connection guarantee

	The PC platform and the software developed for the LTC 502 is compatible with all modern peripheral communication equipment and therefore simplifies the analysis and management of the computed measurement results.

	Printer with USB interface   Printer with parallel interface   Marker units

	Machine control   USB stick   Modem analog and ISDN   Programmable control for in- and outputs to control a tool

Precision angle sensors

• Extreme tough design
• Safety integrity level up to SIL 3
• Absolute potentiometrical measuring system with highest lifetime.
• Increased corrosion protection by anodized housing made of massive aluminium.
• Accurate execution with very good linearity and temperature reliability.
• With connector or PG-gland available
• Very high lifetime even at high-vibration places
• High resolution
   

	PWG 79 S	Housing: Ø79 x 35	Datasheet
	PWG 79 R	Housing: Ø79, redundant	Datasheet
	PWG 64 R	Housing: Ø64, redundant	Datasheet
	PWG 50 S	Cube design: 50x50x35	Datasheet
	PWG 79 I	Housing: Ø79  Current output: 4...20mA	Datasheet
	PWG 79 Y	Housing: Ø79, redundant Current output: 4...20mA	Datasheet
	PWG 50 S 10U	Cube design: 50x50x71  Multiturn potentiometer (10 turns)	Datasheet
	Accessory	Lever Driving plates Mounting flange	Datasheet

德國KOSTYRKA 公司位于機床產業高度發達的德國巴登孚德堡州斯圖加特地區。早在1969年,Peter.A.KOSTYRKA即發明了可傳遞較大轉矩的夾持元件原型，其夾緊和方松速度快、結構緊湊。隨著機床行業的發展，KOSTYRKA 運動件鎖緊單元在同類功能部件領域的*高。

Clamping Sleeves

>> more

Clamping elements for slideways

>> more

Flange type clamping sleeves

>> more

Support Elements
 

>> more

Expanding Sleeves

>> more

Hydraulic pressure generator
 

>> more

Universal Holding
Fixture (UHF)

>> more

Special solution
 

Machine Controls

Kollmorgen offers high-performance motion control with PC-based, drive-resident and standalone motion controller products along with I/O solutions, HMI panels and complete programming software.

More

Automation Platform

Kollmorgen provides a selection of automation platforms designed to complement our motion technologies, accommodate your existing systems and suit your preferred development style. For help choosing the right automation platform for your specific application, use our Product Comparison Table.

More about Automation Platform >>

Software

Kollmorgen offers innovative software solutions for programming every part of the machine, from the servo drive level, to the automated coordination of machine axes, to the human machine interface.

More about Software >>

Controller Hardware

Kollmorgen offers a complete selection of controller hardware for any machine architecture. Controller options include standalone units, PC Card controllers and drive-resident controllers.

More about Controller Hardware >>

I/O

We’re committed to being your single-source supplier for all the motion control equipment you need. We offer a complete selection of I/O slices, couplers and relays and other devices optimized for use with each Kollmorgen automation platform.

More about I/O >>

HMI

The operator interface is one of the most important parts of your machine. Usability is key. You need an HMI with the input and display options best suited to the operating environment and the machine’s specific functionality. We offer touchscreen, function key and keypad options in a variety of sizes to meet virtually any requirements.

More about HMI >>

Accessories

We provide all the cables, connectors and options you need to complete the motion control network.

More about Accessories >>

>> more