制藥網
資料下載
968-1型旋風王飼料粉碎機
發布時間：2008-12-6| 提 供 商 | 臨沂市河東區大華機械廠 | 資料大小 | 0K |
|---|---|---|---|
| 資料圖片 | 查看 | 下載次數 | 135次 |
| 資料類型 | |||
| 免費下載 |
Additionally, the factory has released the latest 968 series CYCLONE KING feed crusher, which is altered based on the structure and essence of the DRIPPING KING of the 1990s, the configuration of the machine is humanized, which could save energy, reduce consumption and automatic control, it’s a substituting products of large, medium-sized and small feed processing factories. The results after destroying tests on various aspects have shown the machine has the following characteristics:
一、本機*改變了傳統的進出料方式，克服了傳統機型耗能多，粉塵大、效率低、勞動強度高、浪費人力等多項缺點。本機zui大限度的加大篩片面積，使物料流動地更加快捷，底部設置的螺旋風機快速將粉碎的物料送入卸料器，直接裝袋。
I. This machine has compley changed the traditional feeding and discharging modes, conquered the traditional disadvantages as large energy consumption, too much dust, low efficiency, high labor intensity and waste of human resources, etc. This machine has enlarged the screening area as much as possible, to make the ingredients flow faster, and the bottom-mounted cyclone fan could feed the crushed ingredients to the discharger until directly to packing.
二、較50-40飼料機相比在不增加動力的情況下，同等電耗節約人工75%效率提高100％。
II. Comparing with 50-40 feed machine, the same power consumption will save 75% human power and the efficiency will be increased by 100% under the circumstances of not increasing the power.
三、篩片布置合理，更換方便快捷，與框架結合嚴密無跑粗現象。
III. The screen piece is laid rationally, it’s fast and convenient to replace, and it’s tightly touches the framework without the phenomena of rough running.
四、采用自動螺旋上料，上料均勻，電壓波動小，電機無發熱現象，杜絕了過負荷燒電機，大大降低了維修電機費用，節約資金，減少了不必要的麻煩。
IV. Automatic auger feeding is adopted, which? is even, with small voltage fluctuation, the motor doesn’t send out heat, which has prohibited the overload from burning the motor and has greatly reduced the motor, the capital has saved and unnecessary troubles have been reduced.
五、本機錘片采用碳化鎢熱處理，堅固耐用，減少了更換錘片的次數。
V. The hammer of the machine is made of tungsten carbonate treatment, which is firm and durable and has reduced the frequency of replacing hammer.
六、軸承采用D級22系列雙滾珠軸承，極限轉速6000轉/分，靜負荷達3400kg，溫升低，噪音小。
VI. The bearing is made of D-class 22 series double ball bearing, with the limit rotation speed of 6000 rpm, the static load of 3400 kg, and the temperature increase of the machine is low, the noise is top small.
七、廠家鄭重承諾：三包期內出現質量問題，本市區（縣）當日發現當日處理：外地市兩日內到達處理。
VII. The manufacturer seriously make commitments that problems occur within the warranty period will be handled within the day after discovery (the city, county area) and problems occur within the warranty period will be handled within 2 days if the customers are not in the city.
八、如下情形不屬于三包范圍;1.正常磨損的易損件：2.操作不當造成不應有的人為損壞。
VIII. The following circumstances don’t belong to the warranty scope: 1. Normal wearing of wearing parts; 2. Man-made damages caused by improper operations.
九、數字規格變動改型，恕不另行通
IX. We are not responsible to inform about the digital specification alteration or model alteration