| 產品名稱: F615-B160
產品型號: F615-B160
產品展商: 南京昌暉自動化儀表有限公司(中國地區(qū)總代理商)
簡單介紹
美國broadleyjames F615電極 FermProbe® PH Electrodes: T-Pull® and Standard Electrode Styles Specifications Ordering Information The T-Pull® and standard style FermProbe PH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstａnd repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes. This rugged, low impedance, process PH electrode continues to provide fast and precise PH measurements even after harsh use and prolonged steam exposure. The FermProbe design specifies that the PH electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed or removed from the housing without twisting or disconnecting the electrode cable. T-Pull® Handle FermProbe PH Electrodes The T-Pull handle eases installation and removal of the electrode from the housing. The electrode can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue. Features: ? Rugged handle design eases removal of electrode from housing. No tools required. ? Greatly reduces cable fatigue. ? Electrode retainer nut is part of the handle. Cannot be lost or misplaced. ? Available with disconnect cap or integral cable. Model F-615 Model F-607 Standard FermProbe PH Electrodes This FermProbe style is designed for economy while still retaining all performance specifications. This electrode is secured into the housing with a reusable electrode retainer nut. All housings are shipped with a reusable electrode retainer nut to be used with this style of FermProbe. Features: ? Most economical, cost effective design. ? Secures to housing with reusable retainer nut. ? Rubber strain relief minimizes cable fatigue. ? Available only with integral cable. Model F-600 How to Order an Electrode (1) Choose Electrode Model. If the electrode needs a disconnect cap, use Model F-615. If the electrode needs an integral cable for extra protection in a washdown area, use Model F-607 or F-600. (2) Choose Electrode Length. If you have already chosen a housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below. (3) Confirm Cable Length and Connector. Model F-615 PH electrodes require a disconnect cable and connector assembly. Model F-600 and F-607 PH electrodes come with 6 ft (2 m) cable and BNC connector. If you need a different cable length or connector, please call the Sales Department for more information. SPECIFICATIONS FermProbe PH Electrode Specifications: ? 0 - 13 PH range ? Steam sterilizable to 135° C ? 150 psig max. pressure ? Double junction, Ag-AgCl reference system ? Electrode secures to housing with threaded retainer nut Ordering Information Call 1- – For Price & Delivery Electrode Model Class Use with these Housing Models Electrode Length Cable Length Connector Electrode Part Number Model F-615 PH FermProbe with T-Pull Handle & Disconnect Cap F-615 A 320, 330, 326,336, 350, 357, 370 130 mm Order Separately F-615-B130-DH F-615 B 320, 330 160 mm F-615-B160-DH F-615 C 320, 330 210 mm F-615-B210-DH Model F-607 PH FermProbe with T-Pull Handle & Integral Cable F-607 A 320, 330, 326,336, 350, 357, 370 130 mm 6 ft (2m) BNC F-607-B130-M06BC F-607 B 320, 330 160 mm 6 ft (2m) BNC F-607-B160-M06BC F-607 C 320, 330 210 mm 6 ft (2m) BNC F-607-B210-M06BC Model F-600 PH FermProbe with Integral Cable F-600 A 320, 330, 326,336, 350, 357, 370 130 mm 6 ft (2m) BNC F-600-B130-A06BC F-600 B 320, 330 160 mm 6 ft (2m) BNC F-600-B160-A06BC F-600 C 320, 330 210 mm 6 ft (2m) BNC F-600-B210-A06BC Home | Products | FAQs | Documents | Tech Support | Contact | Search USA and Canada: Broadley-James Corp. Toll-Free (800) 288-2833 Copyright ? 2006 Broadley-James Corporation. All Rights Reserved. Trademarks |
| 美國broadleyjames F615發(fā)酵電極 | The T-Pull® and standard style FermProbe PH electrodes are designed to be used in bioprocess applications where CIP/SIP procedures are used. Built to withstａnd repeated steam sterilization cycles, the FermProbe quickly stabilizes after steam exposure to be back on-line in half the time of other electrodes. This rugged, low impedance, processPHelectrode continues to provide fast and precise PH measurements even after harsh use and prolonged steam exposure.
The FermProbe design specifies that the PH electrode be secured to the housing by a free-spinning threaded retainer nut. This allows the electrode to be installed or removed from the housing without twisting or disconnecting the electrode cable. |
| | T-Pull® Handle FermProbe PH Electrodes
The T-Pull handle eases installation and removal of the electrode from the housing. The electrode can be easily removed from the housing without being rotated or twisting the cable. This greatly reduces cable fatigue.
Features:
? Rugged handle design eases removal of electrode from housing. No tools required.
? Greatly reduces cable fatigue.
? Electrode retainer nut is part of the handle. Cannot be lost or misplaced.
? Available with disconnect cap or integral cable. |
| | Standard FermProbe PH Electrodes
This FermProbe style is designed for economy while still retaining all performance specifications. This electrode is secured into the housing with a reusable electrode retainer nut. All housings are shipped with a reusable electrode retainer nut to be used with this style of FermProbe.
Features:
? Most economical, cost effective design.
? Secures to housing with reusable retainer nut.
? Rubber strain relief minimizes cable fatigue.
? Available only with integral cable. |
Model F-600 | | How to Order an Electrode (1) Choose Electrode Model.
If the electrode needs a disconnect cap, use Model F-615. If the electrode needs an integral cable for extra protection in a washdown area, use Model F-607 or F-600.
(2) Choose Electrode Length.
If you have already chosen a housing, select an electrode length with the same Class designation as the housing. The housing ordering information box also lists the correct electrode length to order. If you have not already chosen the housing, please review the recommendations next to each electrode model below.
(3) Confirm Cable Length and Connector.
Model F-615 PH electrodes require a disconnect cable and connector assembly.
Model F-600 and F-607 PH electrodes come with 6 ft (2 m) cable and BNC connector. If you need a different cable length or connector, please call the Sales Department for more information. SPECIFICATIONS
FermProbe PH Electrode Specifications:
? 0 - 13 PH range
? Steam sterilizable to 135° C
? 150 psig max. pressure
? Double junction, Ag-AgCl reference system
? Electrode secures to housing with threaded retainer nut | |
定日县|
宕昌县|
邛崃市|
固安县|
方城县|
喀喇沁旗|
黄龙县|
肥东县|
新巴尔虎右旗|
临颍县|
锦州市|
邵东县|
东源县|
建水县|
普安县|
威远县|
玉门市|
工布江达县|
黄石市|
久治县|
临沧市|
五台县|
五莲县|
大同县|
通渭县|
台中县|
庄河市|
纳雍县|
四会市|
富川|
浦县|
牙克石市|
绥滨县|
大竹县|
师宗县|
桂东县|
宁波市|
通化市|
千阳县|
兴海县|
盱眙县|