進口高溫高壓電站截止閥

德國巴赫進口高溫高壓電站截止閥概述：

進口高溫高壓電站截止閥也稱電站截止閥，電站截止閥與其他截止閥產品相比的特點是高溫高壓，*的自密封設計，壓力越高，密封越可靠。由于性能技術特性、工況的特殊使產品也形成了其他產品所替代不了的特點。制造驗收技術條件按日本火力發電用閥門標準E101的規定。磅級電站截止閥的結構長度按E101的規定。閥體焊接坡口按ANSI B16.25的規定或按用戶提供的尺寸。閥蓋填料函嘗試合理，填料加緩蝕劑，密封可靠，開關平穩。閥門具有上密封結構,保證閥門開啟運行時閥桿處不會外漏。

Overview of German Bach imported high temperature and high pressure power station valve:

Imported high temperature and high pressure power station stop valve is also known as special stop valve, power station valve and other valve products are characterized by high temperature and high pressure, the unique self sealing design, the higher the pressure, the more reliable seal. Due to the technical characteristics of the performance, the special work conditions so that the product can also be formed by other products can not be replaced by the characteristics of. Technical requirements for manufacturing acceptance according to the provisions of the standard E101 for thermal power valves in japan. The structure length of the cut-off valve of the power station is E101. The valve body welding groove defined by the ANSI or B16.25 according to user size. Valve cover filler letter try reasonable, filler plus corrosion inhibitor, reliable sealing, stable switch. The valve has a sealing structure to ensure that the valve is not open when the valve stem leakage.

進口高溫高壓電站截止閥的定義：   

1.產品設計制造按ASME B16.34、E101標準，可與進口設備配備使用。
2.閥門中腔采用壓力自緊式密封結構，內腔壓力越高密封性能越好。
3.支管兩端為對焊連接，適應不同的接管要求。
4.閥瓣、閥座的密封面采用slite 司太立鈷基硬質合金堆焊而成，耐磨、耐高溫，抗擦傷性能好、使用壽命長。
5.閥蓋填料函嘗試合理,填料加緩蝕劑,密封可靠,開關平穩。
6.閥門具有上密封結構,保證閥門開啟運行時閥桿處不會外漏。
7.電動截止閥的開啟和關閉由電動裝置來控制，電動裝置分別配有電機、減速器、轉矩控制機構，現場操作機構，手動、電動切換機構。除就地操作外，還可進行遠距離操作。

The definition of the cut-off valve imported high temperature high pressure power station:

1 product design and manufacture according to ASME B16.34, E101 standard, can be equipped with imported equipment.

2 valve cavity pressure self sealing structure, the higher the pressure inside the sealing performance is better.

3 pipe ends welded connection, meet the requirements of different nozzle.

4 sealing surface of the valve clack and the valve seat adopts Slite Slite cobalt based alloy surfacing and wear resistant and heat resistant, anti abrasion performance and long service life.

5 valve cover filler letter try reasonable, filler plus corrosion inhibitor, reliable sealing, stable switch.

6 valve has a seal structure to ensure that the valve is not open when the valve stem leakage.

7 electric valve opening and closing by the electric device to control, electric devices are equipped with a dedicated motor, reducer, torque control mechanism, the field operation mechanism, manual, electric switching mechanism. In addition to local operation, but also for remote operation.

技術參數：

guan網：http://www.twvalve。。ｎｅｔ/html/3471.html