進口電動閘閥

德國巴赫進口電動閘閥概述：

 進口電動閘閥是做直線運作的閥門，它與Z型多回轉執行機構相配，有開關型和智能型。其可分為上下兩部分，上半部分為電動執行器，下半部分為閥門。電動閘閥是直行程電動閥：由直行程的電動執行器配合直行程的閥使用，實現閥板上下動作控制管道流體通斷。通常在自動化程度較高的設備上配套使用。此類閥門操作非常簡單是一種zui常見的啟閉式閥，它利用閘板的上下運作來接通和關閉管道中的流體介質。它廣泛用于自來水、污水、建筑、石油、化工、食品、醫藥、輕紡、電力、船舶、冶金、能源系統等體管線上作為調節和截流裝置使用。

Imported electric gate valve

Introduction of Bach electric gate valve:

Imported electric valve is linear operation of the valve, and Z type rotary actuators to match, switch and inligent. It can be divided into two parts, the upper part of the electric actuator, the lower part of the valve. Electric gate valve is a straight stroke electric valve: the direct stroke of the electric actuator with a straight stroke of the valve, the valve plate to achieve the upper and lower control of fluid flow through the pipeline. Usually used in a higher degree of automation equipment. This kind of valve operation is very simple is one of the most common open and close valve, it uses the gate up and down operation to connect and close the pipeline fluid medium. It is widely used in tap water, sewage, construction, petroleum, chemical, food, medicine, textile, electric power, shipbuilding, metallurgy, energy systems, as a body of pipeline regulation and closure devices.

進口電動閘閥的定義：

1、流動阻力小，密封面受介質的沖刷和侵蝕小（閘板開啟度高）。
2、開啟較有力，密封的性能較好，介質流向不受限制，不攏流，不降壓力。
3、形體簡單明了，制做工藝性好，使用范圍廣。
4、閉閥所需力矩較小。

Definition of imported electric gate valve:

1, the flow resistance is small, the sealing surface by medium erosion and erosion of small (gate opening high).

2, open more powerful, sealed performance is good, medium flow unrestricted, no flow, no pressure drop.

3, the body is simple and clear, good manufacturability, wide range of use.

4, close the valve required torque is smaller.

進口電動閘閥技術參數：

進口電動閘閥guan網：http://www.twvalve。。ｎｅｔ/html/3382.html