概 述 Descriptions

★槳葉式干燥器是一種在設備內部設置攪拌槳，使物料在槳葉的攪動下，與熱載體以及表面充分接觸，從而達到干燥目的的低速攪拌干燥器，結構形成一般為臥式，雙軸或四軸。

★槳葉式干燥器分為熱風式和傳熱式。熱風式即通過熱載體（如熱空氣）與被干燥有物料相互接觸并進行干燥，在傳導式中熱載體并不與被干燥的物料直接接觸，而是熱表面與物料相互接觸。傳導式的優點是物料不易被污染，排氣量小，熱效率高，體積相對小，有利于節約能源及防止空氣污染。

★適用范圍：塑料 樹脂類產品 無機藥品 肥料 飼料 食品 化纖 染料 淀粉 下水管污泥等產品的干燥，如：氯乙烯 樹脂 尼龍 聚乙烯 聚丙烯 淀粉 氯化鈉 砂糖 氧化鐵 長石 燒堿粉末等各種粉粒及膏狀料。

★Oar drier is low speed churner drier that equipped oars inside equipment.The damp raw material is churned to ample connecting wigh hot carry and the surface can ehoruzontal,double scrolls of fore scrolls.

★There are hot air style and transfer style two stlyles. The drying in hot style is completed through conection of hot air and material. Intranster style,material is connected with hot surface to drying,ia can prevent pollution of material.The air outlet is few,effection is high,small size,save energy and prevent pollution of air

★It is suitabie for drying in plastic,resin,inorganic compounds machine,fertilizer,feed.drestuff,starch,mud and so on …

特 點 Features

★設備緊湊，占地面積小，熱傳導系數高，熱效率及佳，一般可達到80%-90%，是節能型設備。

★設備低轉速，對顆粒狀及片狀物料的破碎性很小。

★對物料適應性廣，操作彈性大，物料停留時間幾分鐘到幾小時，可調。

★附屬設備簡單，投資少，操作費用底。

★一機多用，可作干燥、冷卻、氣體回收、反應加熱（預殺菌）等工藝操作。

★Compact structure, small occupied space, high degree of heat conducting, best heat effeat , in general heat effect is attion to 80-90%,it is a kind of device in saing energy.

★Low speed, it is difficult to break into shaping of granule and slice raw materil.

★To raw material ,wide use ,easy to operate and raw material is adjustable from few minuters to few hours.

★The attachment is simple, and will save investment.

★There is many uses by it, such as drying, cooling recoverying air, kesoonding, heating and so on.

所有參數僅作參考，視物料情況，本公司擁有變更權利，并不另行通知。

All datas are used for reference only. According to the condition of material, our factory has the right to change but not notice, pardon!