當前位置：常州允鵬機械有限公司>>Drying Series>>HG rolling scratch board drier>>HG rolling scratch board drier

HG rolling scratch board drier

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號HG

品牌

廠商性質生產商

所在地常州市

在線詢價收藏產品

聯系方式：顧先生查看聯系方式

更新時間：2015-07-02 08:44:02瀏覽次數：2112次

聯系我時，請告知來自制藥網

產品分類 品牌分類

  BaoGan/寶康
  其他品牌

常州允鵬機械有限公司

經營模式：生產廠家

商鋪產品：115條

所在地區：江蘇常州市

聯系人：顧先生（銷售部）

詢價 給他留言

產品簡介

HG rolling scratch board drier is a kind of rotating continuous drying equipment with internal heating conducting -style

詳細介紹

Product name:

HG rolling scratch board drier

Class:

Drying Series

Description:

HG rolling scratch board drier

Principle of Work:

is a kind of rotating continuous drying equipment with internal heating conducting -style ,Certain thickness of materials flim theres to the lower trough trough of materials under the rotating cylinder .Heat is transferred to the internal wall of materials under the rotaing cylinder .Heat is transferred to the internal wall of the cylinder through ppes and misfired again to the materials film so as to dry materials .Dried hterials are then scraped out by the blade fitted on surface of the cylinder ,fall down to the spiral conveyor under the blade ,and are conveyed ,lected and packed.

Features and applications:

1、Large operation elasticity and wide application. Various drying factors of the cylinder dryer can be adjusted, such as density of feeding aerials/thickness of materials film, temperature of heating medium, rotating speed of the cylinder etc. which can change drying speed of the under dryer. As these factors have no interrelations each other, it brings about great convenience to dry operation. and makes it applicable to ing of various materials and to meet different requirement of production.
2、High thermal efficiency. The principle of heat transfer of the cylinder dryer is heat conduction whose conducting direction keeps identical whole operation circle. Except heat dissipation of end cover and radiation loss, all heat dissipation of end cover and radiation loss, all heat can be used for evaporation of wet materials on the wall the cylinder. Thermal deficiency can reach 80-90%.
3、Short drying period. The drying period of materials is normally 10 to 15 seconds, so it is suitable for heat-sensitive materials. It can be also rated under less pressure condition if it is put in vacuum.
4、Fast drying rate. As film of materials coated on the wall of the cylinder is very thin. Normally, thickness is 0.3 to 1.5mm, plus directions heat and mass transmitting are identical, the evaporation strength on the surface of the film can keep at 30-70kg·H2O/m It is suitable for drying liquid raw materials or thick liquid in chemical industry, dyestuff industry, pharmaceutical industry, foodstuff stry, metallurgy industry and so on.