Publication 1747-UM011G-EN-P - June 2008
2. Install the hardware for the top mounting tabs.
3. Slide the chassis over the installed hardware and tighten the 
screws.
TIP
Scrape paint off the back panel for an electrical connection 
between the chassis and back panel.
ATTENTION
If the chassis mounting tabs do not lay flat before the 
screws are tightened, use additional washers as shims so 
the chassis will not warp when tightening the screws. 
Warping the chassis could damage the backplane and 
cause poor connections.
M4 or M5 (#10 or #12) phillips screw 
and star washer (or SEM screw)

Siemens AMS-P216-A32 C8451-A45-A12-2
Siemens AMS-P217-A32 
Siemens SMP-E120-01
Siemens SMP-E129 C8451-a11-a30
Siemens SMP-E131 
Siemens SMP-E132 
Siemens SMP-E2-A3 
Siemens SMP-E20 C8451-A17-A26-7
Siemens SMP-E200-3 
Siemens SMP-E200-A1 C61451-A89-C3-2
Siemens SMP-E200-A1 C8451-A1-A191-1
Siemens SMP-E204-A1 C8451-A1-A33-1
Siemens SMP-E211-01 C61451-A68-C7-3
Siemens SMP-E211-02 C61451-A68-C7-3
Siemens SMP-E211-A11 C8451-A1-A107-3
Siemens SMP-E212 C61451-A89-C8-3
Siemens SMP-E212-01 C61451-A89-C8-3
Siemens SMP-E218-A1 
Siemens SMP-E220-3

1756-PC75 1756-PC75  1756-PC75   

**********************************************************

全國zui大的備件庫！---------：張可可
選擇zui有權利的公司！-----：
選擇*的質(zhì)量！--------
選擇的產(chǎn)品！---------
選擇的服務！------------
選擇zui快的貨期！---------------:
選擇*的價格！------------------:

**************************************************************

Siemens SMP-E220-A1
Siemens SMP-E221-A1
Siemens SMP-E224 C8451-A12-A76-1
Siemens SMP-E230-A1
Siemens SMP-E240-2 C61451-A89-C12-2
Siemens SMP-E302-03 
Siemens SMP-E302-04 
Siemens SMP-E302-A11 
Siemens SMP-E302-A11
Siemens SMP-E306-A1 C8451-A14-A4
Siemens SMP-E4-A3 C8451-A1-A66-3
Siemens SMP-E423-A30