1747-SDN  1747-SDN   1747-SDN  詳細說明：
**********************************************************

全國zui大的備件庫！---------：張可可
選擇zui有權利的公司！-----：
選擇*的質量！--------
選擇的產品！---------
選擇的服務！------------
選擇zui快的貨期！---------------:
選擇*的價格！------------------:

**************************************************************

**********************************************************

全國zui大的備件庫！---------：張可可
選擇zui有權利的公司！-----：
選擇*的質量！--------
選擇的產品！---------
選擇的服務！------------
選擇zui快的貨期！---------------:
選擇*的價格！------------------:

**************************************************************

ublication 1747-UM011G-EN-P - June 2008
2. Drill holes in the backpanel of your enclosure and install the top mounting hardware. 
Use M4 or M5 (#10 or #12) phillips screw and star washer (or SEM screw).
3. Scrape off the paint from the backpanel between the chassis and backpanel.
4. Slide the chassis over the installed hardware and tighten the screws.
5. Install the remaining tab hardware.
Chapter 6
(Installing Your 
Hardware Components)
3. Install the power supply. Reference
1. Align the circuit board of the power supply with the card guides on the left side of the 
chassis, and slide the power supply inuntil it is flush with the chassis.
2. Fasten the power supply to the chassis.
Chapter 6
(Installing Your 
Hardware Components)
Use these screws to fasten the power supply to the chassis.
1.2 Nm (11 lb-in) Maximum Torque