VH-8 V型小型混合機、藥物混合機 簡介與特點：
一、概述：
本機適用于制藥、化工、食品的干粉狀、顆粒裝物料的混合。
該機混料筒結構*，混合均勻，效率高，不積料。整機結構簡單，操作容易。外表面和物料接觸部分均采用優質不銹鋼制造，造型美觀，維護、清洗方便。
二、原理與結構：
本機一端裝有電機與減速機，電機功率通過皮帶傳給減速機，減速機再通過聯國器傳給V型桶。使V型桶連續運轉，帶動桶內物料在桶內上、下、左、右進行混合。
三、使用及保養：
1、安裝：將機械放置平穩，裝好機腳，墊平，使機械能運轉自如。
2、使用前先將須加油處加好油，然后進行空載運轉，檢查各緊固件是否松動，電氣是否正常，機械是否運轉正常，如有異常，進行整修和調試。
3、將加料口轉*面，打開加料蓋進行加料，加料量不可超過規定容積，然后關緊加料蓋，開動機器進行運轉，途中如發現異常，必須停機檢查。
4、下班后或更換品種必須將料斗內、外沖洗干凈。
規格 | 桶體容積 | 工作容積 | 電動機功率 | 混合轉速 | 外形尺寸 | zui大裝量 | VH5 | 5L | 2L | 0.25kw | 24r/min | 560×270×560 | 2kg | VH8 | 8L | 3.2L | 0.25kw | 24r/min | 610×280×740 | 3.2kg | VH10 | 10L | 4L | 0.25kw | 24r/min | 610×280×740 | 4kg | V14 | 14L | 5.6L | 0.37kw | 20r/min | 780×350×850 | 5.6kg |
|
Product introduction:
This product is a v-shaped efficient asymmetric hybrid machine, it is used in the chemical industry, food, medicine, feed, ceramics, metallurgy field powder or makings shape material mixing. The structure is reasonable, is simple, the operation airtight, access to materials convenient, (artificially or vacuum charging) barrel made of stainless steel, easy cleaning, is one of enterprise's foundation equipments.
VH - 14 v-shaped small mixer, drug mixer introduction and features:
A, summary:
The machine is suitable for pharmaceutical, chemical and foodstuff dry powder, granule outfit to mix the raw materials.
This machine mixing tube structure is unique, mixing, high efficiency, not accumulate material. The machine is simple in structure, easy to operate. Outside surface and part contacting materials adopts high quality stainless steel to make, beautiful modelling, maintain, clean easily.
Second, principle and structure:
This machine is equipped with end motor and reducer, motor power through belt to reducer, gear reducer again through united GuoQi to V type bucket. Make v-shaped barrels of continuous operation, driving the barrel materials in barrel up, down, left, right mix.
Three, use and maintenance:
1, installation: to mechanical placed smoothly, pack good machine feet, cushion flat, make the mechanical energy function properly.
2, before use shall be refuel in oil, then add good no-load running, check the fastener whether become loose, electrical, mechanical whether whether normal operation, if there are any complications, undertake refurbishment and debugging.
3, will turn to the top, feeding mouth open charging cap to be charging, add shoes do not exceed the specified volume, then appears charging cover, start the machine in motion, if discovery is unusual, on the way to stop check.
4, after work or replace varieties must take the hopper inside and outside is rinsed clean.
四、要求原理與結構
本機一端裝有電機與減速機，電機功率通過皮帶傳給減速機，減速機再通過聯軸器傳給V型桶。使V型桶連續運轉，帶動桶內物料在桶內上、下、左、右進行混合。
五、使用及保養
1、安裝：將機械放置平穩，裝好機腳，墊平，使機械能運轉自如。
2、使用前先將須加油處加好油，然后進行空載運轉，檢查各緊固件是否松動，電氣是否正常，機械是否運轉正常，如有異常，進行整修和調試。
3、將加料口轉*面，打開加料蓋進行加料，加料量不可超過規定容積，然后關緊加料蓋，開動機器進行運轉，途中如發現異常，必須停機檢查。
4、下班后或更換品種必須將料斗內、外沖洗干凈。
互助|
深泽县|
巩留县|
普兰县|
山阳县|
九寨沟县|
根河市|
尖扎县|
托克逊县|
连城县|
木兰县|
金乡县|
阳江市|
元阳县|
成安县|
阳高县|
织金县|
阳泉市|
克什克腾旗|
白银市|
墨脱县|
兴安盟|
南华县|
长武县|
二连浩特市|
墨江|
琼海市|
绿春县|
垫江县|
平昌县|
镇赉县|
丹巴县|
翼城县|
盖州市|
天柱县|
蓬安县|
沽源县|
泰顺县|
望江县|
比如县|
开平市|