B.HY-300HCA 火焰處理機
功能特點
1 本機裝有自動點火裝置,只要按動按鈕,噴火頭可自動燃燒。
2 本機的2個調速電機分別控制錐尖和輸送帶的速度,快慢可調。
3 輸送帶裝有間歇傳感器,錐尖行走到噴火區時,可自動停止X秒,以提高火焰處理質量。
4 傳送部分采用進口微型馬達,用無級調速的方式調整速度,以適應不同工件的不同要求。
5 噴火頭及匯流器設計*獨到,燃料利用效率高,是節能產品。
6 電鍍鋁合金槽、錐形支承,鍍亮藍鏈板,更顯本機美觀適用。
7 整機結構新穎、設計合理、操作方便、底部裝有活動腳輪,移動方便。
應用范圍
本產品主要用于PE或PP塑料制品表面的火焰處理,經本機處理后的塑膠制品印刷后,油墨能更加牢固地附著于被印物品上。
技術參數
電子點火
錐尖速度可調
輸送帶速度可間歇
圓瓶扁瓶均可處理
火焰寬度:200MM
燃燒氣體:標準石油氣
助燃?xì)怏w:壓縮空氣8kgf/CM2
電源:220V/50Hz
輸送帶速度:0-10m/min
輸送帶尺寸:1830×360mm(長×寬)
外形尺寸:1850×550×1200mm (長×寬×高)
重量:100KG
B.HY-300HCA Flame Treatment Machine
Feature
1.Assembled with electron ignition set, the flame nozzle will be ignited automatically as long as you press the button.
2.Two speed adjusting motors control the cone speed and conveyor speed apart, the speed adjusting is available.
3.Micro motor adopted for conveyor adjusts speed by stepless speed adjusting mode to meet the requirements of various workpiece.
4.Advanced and unique designs of flame nozzle and distributor make fuel utilization rate high, so it is an energy-saving product.
5.Electroplated aluminum alloy holder and blue bright plating conveyor make nice appearance.
6.The structure of the machine is new, design is reasonable, operation is convenient, and assembled with movable roller wheels to make convenient move.
Application
It is used for flame treatment on PE/PP. Flame treatment improves ink adhesion on the substrates.
Parameter
Frame width: 200mm;
Combustion gas: standard petrolic gas;
Combustion-supporting gas: compression air with pressure 8KGF/cm2;
Power Supply: 220V/50Hz;
Conveyor speed: 0~10m/min;