干燥設備 粉碎設備 混合設備 反應設備 過濾分離設備 過濾材料 滅菌設備 萃取設備 貯存設備 傳熱設備 鍋爐 塔設備 結晶設備 其它制藥設備
湖南通大自動化供水設備有限公司
湖南通大自動化供水設備有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質生產商
所 在 地長沙市
聯系方式：張杰查看聯系方式
更新時間：2025-01-05 08:59:02瀏覽次數：149次
聯系我時，請告知來自 制藥網暫無信息 |
產品分類： 油泵 產品名稱：圓弧齒輪油泵,增壓油泵,噴射燃油泵,潤滑油泵 流量范圍：Q=0.6～50m3/h 揚程范圍：壓力0.6Mpa 輸送溫度：-2......
YCB系列圓弧齒輪泵YCB SERIES CIRCULAR ARC GEAR PUMP
用途
■在輸油系統中可作傳輸、增壓泵。
■在燃油系統中可作輸送、加壓、噴射的燃油泵。在一切工業領域中,均可作潤滑油泵用。
■Application:
This pump can be used as a transfer and booster pump in oil delivery systems. It can also be used as a fuel pump for delivery, pressurization, and injection in fuel systems. It can be used as a lubricating oil pump in all industrial fields.
適用范圍
■適用于輸送不含固體顆粒和纖維、無腐蝕性,溫度不高于80℃.粘度為5~1500cSt的潤滑油或性質類似潤滑油的其它液體,本系列另有精鑄不銹鋼材質,適用于腐蝕性介質。
結構特點
■該齒輪采用具有水平的新技術一雙圓弧正弦曲線齒型。它與漸開線齒輪相比,的優點是齒輪嚙合過程中齒廓面沒有相對滑動,所以齒面無磨損、運轉平衡、無困液現象,噪聲低.壽命長、效率高。該泵擺脫了傳統設計的束縛,使得齒輪泵在設計、生產和使用上進入了一個新的領域。
■泵設有差壓式安全閥作為超載保護,安全閥全回流壓力為泵額定排出壓力的1.5倍,也可在允許排出壓力范圍內根據實際需要另行調整。但是此安全閥不能作減壓閥長期工作,需要時可在管路上另行安裝。
■該泵軸端密封設計為兩種形式;一種是機械密封,一種是填料密封,用戶可根據使用要求選擇。
■Application:
This gear pump is suitable for conveying lubricating oil or other liquids with similar properties, with a viscosity of 5~1500cSt, which do not contain solid particles, fibers, or have no corrosiveness. The series also has precision cast stainless steel material, which is suitable for corrosive media. The temperature should not exceed 80℃.
■Structural Characteristics:
This gear adopts a new technology with an international advanced level of a double circular arc sine curve tooth profile. Compared with the involute gear, the most prominent advantage is that there is no relative sliding between the tooth profile surfaces during gear meshing, so the tooth surface has no wear, runs smoothly, and has no trapped liquid phenomenon, low noise, long life, and high efficiency. The pump breaks away from the constraints of traditional design, making gear pumps enter a new field in design, production, and use.
■The pump is equipped with a differential pressure safety valve as overload protection. The full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump and can be adjusted separately within the allowed discharge pressure range according to actual needs. However, this safety valve cannot work as a pressure reducing valve for a long time and can be installed separately on the pipeline when needed.
■The shaft end seal of the pump is designed in two forms: mechanical seal and packing seal. Users can choose according to their requirements.
YCB系列圓弧齒輪泵性能參數YCB SERIES CIRCULAR ARC GEAR PUMP PERFORMANCE DATA
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
制藥網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
防城港市|
保山市|
介休市|
息烽县|
拜城县|
龙南县|
灵丘县|
佳木斯市|
海阳市|
汉川市|
将乐县|
东宁县|
赞皇县|
平罗县|
荥阳市|
乌兰浩特市|
明溪县|
兴隆县|
红安县|
吴桥县|
绥宁县|
门头沟区|
资源县|
深州市|
会东县|
射阳县|
眉山市|
崇信县|
高碑店市|
长乐市|
古丈县|
黄平县|
广灵县|
余江县|
德州市|
陆河县|
凤凰县|
田林县|
崇阳县|
东阳市|
临沂市|