特點:

1.塔體具有冷風夾套;2.塔體上裝有自動振打裝置;3.塔體，管路配有快開清洗孔及排污孔;4.自動控制恒溫加料罐;5.手工高壓洗耳恭聽塔隨機附件;6.與物料接觸的部分采用不銹鋼材料制作;(或全不銹鋼制造)7.物料收集采用兩級旋風除塵器裝置，或一級旋風除塵器和濕式除塵器;8，進風濕度實現自動控制及連續裝置;9.配有氣掃裝置。

features

1.tower body has jacket of cool air;2.tower body is epuipped with automatic vibration and beating device;3.tower body and pipe line have cleaning hole and swage discharge hole that can open quickly;4.thermostat feeding tank;5.accompanide parts if high pressurewashing tower;6.the parts that can contact with raw material are made of stainless steel fully;7.the collecting of raw material adapts tow-grade cyclone duster or one-grade cyclone duster and one-grade damp duster;8.the temperature of inlet are can be controlled automatically and continuously;9.epuipped with are sweeping device.

該機采用全封閉形式，所有部件均采用不銹鋼制造，配有三級凈化裝置，過濾后的空氣達十萬級要求。簡體與頂部裝有冷壁裝置，使壁溫280℃。干燥塔內裝有氣刷掃塔裝置。經該機干燥后的申藥浸膏粉，不會出現焦化變質現象。

基本原理:

中藥浸膏高速離心式噴霧裝置是離心式噴霧干燥技術在特定物料干燥中的應用，也是利用高速離心式霧化器使物料分散成霧狀，與熱空氣充分接觸，完成瞬間干燥，形成粉狀成品的干燥裝置。中藥浸膏于干燥機是專門用來解決中藥浸膏和植物撮液的噴霧干燥機，它解決了物料在原lpg高速噴霧干燥機在中藥浸盲干燥中出現的以下情況:

1、物料粘壁，收粉率低:2，物料在壁上停留時間長，產生物料的焦化變質現象;3，難以清洗，不符合gmp要求;4，產量低;lpg-l50型噴霧干燥機，其產量只能處理50-6okg/h料液。

鑒于以上狀況，我廠根據中藥浸膏的物料性質與工藝要求設計了中藥浸膏干燥機。它解決了歷*中藥浸膏干燥機難題，干燥后的物料顏色好、不變質，大大地提高了工廠的經濟效益，中藥浸盲與lpg高速離心噴霧干燥機相比有了以下特點:1、采用了三級空氣凈化，使進風達到30萬級要求;2，采用了冷壁裝置，使內壁溫度達s1口80。c，物料在壁上停留也不焦化;3，整個體積是原lpg標準型離心噴霧的3·5倍:4，采用快開沖洗裝置，適用于多品種生產要求;5，除塵采用了濕式除塵，使粉塵無外出，符合環保要求;6，采用氣掃裝置，其效果更令人滿意;7，提供霧化器2臺，交采用變頻調速;8、采用了plc控制，程控系統屏幕顯示;9·帶沖洗裝置;10、采用干空氣密閉輸送。

general desc-riptionsthe machine adapts full seal form. all parts are made of stainless steel. it is epuipped with three grades of purifying qpparatus.the filtered air reaches the repuirement of one hundred thousand grades. the cooling apparatus of wall is installed at the cylinder body and top. it makes the wall temperature less than 80℃ .air sweeping device is installed inside the drying tower.the dride immersed ointment power of traditional chinese medicine can not appear the phenomenon of carbonization and degeneration. the ratio of received power is raised greatly.moreover is can not produce the phenomenon of medicine mixing and wall staying. basic principle :high-speed centrifuge atomizing apparatus for immersed ointment of traditional chinese medicine is anapplication of centrifuge atomizing technique i special rawmaterial.it is an apparatus using high-speed centrifuge atomizer to make raw material distribute fog that contacts with hot are fully and finish the dry momentarily and form power finished product. the special drier for immersed ointment of trfditional chinese medecine is used to solve immersed ointment of traditional chinese medicine and extracted liquid of phant. it solves the condetions existed in original lpg high-speed atomizing drier.1. raw material is attached to wall and the ratio of received powder is low;2. because the staying time of raw material at wall is long,the phenomenon of carbonization and degeneration can be porduced;3. it is different to clean and can not meet the requirement of gmp;4. low in output;model lpg-150 atomizing centrifuge drier can process 50-60 kg/h of raw material liquid.in view of this,according to the properties and process requirements of immersed ointment of traditional chinese medicine,our factory researched and desighed the special drier for immersed ointment of traditional chinese medicine and won two items of china patent.it solves the historical difficult problems in drying immersed ointment of traditional chinese medicine.the color of dried raw material is good .the dried raw material does not degenerate.it raises the economic benefit greatly .compared with original lpg high-speed atomizing drier,it has the following features.1. being adapted three-grade are purification,the inlet air reaches the requirement of one hundred thousand grade;2. being adapted wall cooling device,the temperature of inner wall with be 80℃ .even if raw material is stayed on the wall, it can not carbonize;3. its whole volume is 3.5times of standard lpg high-speed atomizing drier;4. being adapted quick washing device.it is can meet the requirements of production for varieties products;5. being adapted damp dust removing device,there is no power dust out.it is in conformity with the requirement of gmp;6. being adapted are sweeping device,the clean effect is satisfied;7. equipped two sets of atomizer and adapted frequency control;8. adapted plc control and display through the screen of program control system;9. equipped with washing device;10.adapt the seal method to transport dry air.