TDA-99B  試驗系統

優勢與特點

• 易用性
• 模塊化設計，可以定制
• 快速的周期
• 人體工學設計
• 在單臺多個測試
• 可靠和可重復
• 低維護
• 固體流量及壓力傳感器
• 自診斷程序
• 視覺/聽覺報警 
• 用戶友好的觸摸屏
• 用戶可編程測試參數
• 數據記錄 
• 串行數據輸出 

英文詳細介紹

Description
The TDA-99B Protective Mask Test System provides a broad range of testing functions for military and commercial masks and respirators. The system is very easy to use, with full data management capabilities. The modular design enables testing of virtually all protective masks and mask components to a wide variety of test standards. The TDA-99B is ideal for use in manufacturing plants, mask storage depots, cleaning/repair facilities, and any other location where quality assurance testing of masks and respirators is required.

The TDA-99B was designed to replace the antiquated military M14 and commercial TDA-104, TDA-2ENB and TDA-101 test systems that have been in widespread use for decades. The basic system provides aerosol-based leakage testing of protective masks with or without the filter canisters attached. Additionally, the leakage isolation "probe" test enables the user to locate leaks normally invisible to the naked eye so that repair/replacement decisions can be made. The touch-screen interface and Microsoft Windows™ based control system provide maximum data management flexibility. The TDA-99B also includes an integrated aerosol purge and filtration system to eliminate the need for a fume hood.

Optional Capabilities

In addition to the basic functionality described above, the TDA-99B can also be configured to provide the following optional protective mask testing capabilities:

Outlet Valve Test - The outlet valve can be isolated for airflow leakage under tightly controlled pressure and flow conditions.

Drink Tube Flow Test - The drink tube flow and resistance are measured to determine if there is blockage in the tube.

Drink Tube Valve Test - The drink tube valve is tested for leakage under controlled pressure conditions.

Drink Train Leak Test - The entire drink tube is tested for leakage under controlled pressure conditions.

Parallel Measurement - Dual detection systems can provide parallel measurement of leakage in two areas of the mask simultaneously, such as nose cup and eye lens area.

Hose Testing - Enables full leakage testing of masks with air supply hoses.

Extra Test Heads - The base TDA-99B includes one medium or small test head with an inflatable peripheral seal. Additional test heads can be provided for testing an extremely wide variety of full-face and neck-seal protective masks.

Breathing Simulation - Although typical leakage tests use a constant airflow under negative pressure, the TDA-99B can be integrated with a full-function sinusoidal breathing system to simulate a wide range of human respiratory patterns.

Mil-Spec Mask Flexing - The TDA-99B can easily incorporate Mil-Spec flexing hardware and fittings, with full data logging capability and screen-by-screen Mil-Spec flexing instructions.

Since all TDA-99B Protective Mask Test Systems are made to order, additional testing functionality and options can be designed to meet your specific needs.
Please contact ATI Sales for further information.

Size 30" x 36" x 52" （W x L x H）
Weight 150 lbs.
Power Requirements 100 to 250 volts AC @ 50 to 60 Hz
Compressed Air Requirements 70 ± 10 psig @ 3 cfm
Aerosol Simulant Poly-dispersed oil aerosol （Typically PAO - polyalpha olefin）- 0.1 to 0.5 µm CMD particle size
Aerosol Detection Near forward light scattering photometry: 0.0005 to *
 

Benefits and Features

• Ease of Use
• Modular Design Enables Customization
• Fast Cycle Times
• Ergonomic Design
• Multiple Tests on a Single Bench
• Reliable and Repeatable
• Low Maintenance
• Solid State Flow and Pressure Sensors
• Self-Diagnostic Routines
• Visual/Audible Alarms
• User-Friendly Touch Screen
• User Programmable Test Parameters
• Data Logging
• Serial Data Output