用途:用于大型瓷套管切割端面及研磨外圓端面或倒角。

組成:床頭箱、左右切割研磨頭架、左右溜板箱箱、床身、尾架、過濾裝置和電氣控制裝置等。

特點:由于采用微機控制來完成工藝要求的動作，所以切割、研磨質量高(表面光潔度達Ra μm0.8,端面平面度為0.04mm,兩端面平和度為0.08mm),生產效率高，結構合理。

Application: Used for cutting end face of large porcelain bushing and grinding end face of outer circle or chamfering.

Composition: head box, left and right cutting and grinding head frame, left and right slide plate box, bed body, tail frame, filter device and electrical control device, etc.

Features: due to the use of computer control to complete the process requirements of the action, so cutting, grinding quality is high (surface finish up to Ra μ M0.8, the flatness of the end face is 0.04mm, the two end face flat degree is 0.08mm), high production efficiency, reasonable structure.

主要技術參數：