特點
1.內膽為高溫碳化硅爐膛，此爐膛特點是發熱均勻，導熱快.保溫性好。省電經濟實惠;外桶和中桶材質為鋼板加精粉烤漆。
結構采用內:外桶中空通風散熱方式
IN THE GALLBLADDER FOR THE HIGH TEMPERATURE SILICON CARBIDE CHAMER, THIS CHAMBER CHARACTERIS-
TIC IS GIVES OFF HEAT EVENLY, THE HEAT CONDUCTION IS QUICK. THE HEAT PRESERVATION IS GOOD. SAVES THE
ELECTRICITY TO BE ECONOMICAL; OUTSIDE THE BARREL AND THE BARREL MATERIAL QUALITY ADDS THE FINE
POWDER BAKING VARNISH FOR THE STEEL PLATE. INSIDE AND OUTSIDE THE STRUCTURE USES A BARREL MIDHEAV-
EN TO VENTILATE THE RADIATION WAY
2.保溫材質為進口高密度陶瓷纖維棉,
HEAT PRESERV ATION MATERIAL QUALITY FOR IMPORT HIGH DENSITY CERAMIC FIBRE COTTON AND KAPOK
3.防密之迫緊材質為高溫陶瓷纖維棉整體切割而成.
AGAINST DENSE COMPELS THE TIGHT MATERIAL QUALITY TO BECOME FOR REFRACTORY CERAMICS TEXTILE FIBER
COTTON AND KAPOK WHOLE CUTTING
4.溫度范圍: RT+50'C~1200C, 常用1100°C
TEMPERATURE RANGE: RT+50C~1200 C, COMMONLY USED 1100C
5.溫度解析度: 1. 0C，控制精度士1.0
TEMPERATURE RESOLUTION: 1.0C, CONTROL PRECISION土1.0
6.溫度控制:微電腦PID自動演算功能，LED字 幕顯示
TEMPERATURE CONTROL: MICROCOMPUTER PID AUTOMATIC CALCULATION FUNCTION, LED CAPTIONS DEMON-
STRATION
7.感溫入力(K)TYPE輸出為12V,感溫體采用陶瓷保護式高溫探測體.
THE FEELING ENTERS THB STRENGTH (K) THE TYPE OUTPUT IS WARM 12V, THE FEELING WARM BODY USES THE
CERAMIC PROTECTED TYPE HIGH TEMPERATURE SURVEY BODY
8. 電流控制器為進口S S R無接點RELAY
THE ELECTRIC CURRENT CONTROLLER TO IMPORT SSR NON-CONTACT RELAY
9. 發熱體,發熱均勻平穩,使用壽命長.
THE TOP HEATING ELEMENT, GIVES OFF HEAT EVENLY STEADY, THE SERVICE LIFE IS LONG
10.時間控制:附計時器，溫到計時，時到自動停機
TIMING CONTROL: ATTACHES THE TIMER, ARRIVES AT THE TIME WARM, WHEN TO AUTO-STOP
11.可按客戶要求配置出口(費用另計)
MAY ACCORDING TO CUSTOMER REQUEST DISPOSITION STACK NOZZL