呼吸閥擋板（FCI型）

FCI Type Breathing Valve Flap

安裝方法：

將油罐頂呼吸閥

①（如圖示、下同）取下，然后將擋板

⑤折疊從結合管

③送入

④內(nèi)展平，而后將固定板盤置于接合管法蘭中心位置，把靜電接地線

②墊圈壓在呼吸閥連接螺栓下方，然后將呼吸閥重新安裝好即可。

1、呼吸閥擋板吊裝于呼吸閥與油罐的接合管下方，以減少呼吸過程中油氣外溢的損失。

2、訂貨時請指明名稱、規(guī)格、型號。罐頂接合管實際高度n。

Installation method:

①the respiration valve oil(as shown, similarly hereinafter)remove,ａnd then will dampers

⑤from folding conjugation tube

③④into within opened out,ａnd will be fixed board dish in conjugation tube flange center,the static grounding lines

②in the respiration valve gasket pressure below the connecting bolts,ａnd then will the

respiration valve to install a good can.1 the reducebig breath process of oil and gas spill

losses,2.ordering,please specify name specification,type,potactual height n conjugation tube.