本粉碎機組由GF30B粉碎機的吸塵器有機結合起來，采用垂直下出料設備，使某些流動性較差的料粉碎后出料流暢機內無積粉現象。
　　本機的工作原理是物料進入粉碎室在高速旋轉的活動齒盤與固定齒盤受齒的沖擊的作用下被粉碎，經篩網篩選后即成為所需的粉料。
　　本組的及吸塵器均采用優質不銹鋼材料制成，經*工藝加工機殼內壁光滑平整能使出粉更流暢，更便利殼內清洗工作。高速齒盤與活動牙齒經特種焊接，使活動牙齒堅固耐用安全可靠。本機符合藥品生產的“GMP”要求。
　　本機因高速旋轉，故高速齒盤經平衡測試整機在正常使用過程中達到平穩無震動，高速齒盤與傳動軸連接采用鎖緊裝置在使用中更**可靠。
　　GF30B2型是在GF30B機組的基礎上增加水冷卻裝置。


　　Set The Pulverizer Set consists of GF30BZ TYPE Pulverizer and duster perfectly.Being adapted the vertical low raw material discharging equipment,it makes some raw materials with poor fluidity after broken can be dischanged unblocked and no the phenomenon of accumulated powder.
　　Its principle of work is as follows:when raw material entered into the crushing chamber,it is broken under the impacting of movable and fixed gear disks that are rotated in high speed and then becomes the needed raw material through screen.
　　Its Pulverizer and duster are all made of qualified stainless steel.Its inner wall of the housing is smooth and level being processed through superior technology.Therefore it can make the powder discharging more flowing and is benefit to the work of clean too.The gear disk of high speed and movable teeth are welded through special welding,it makes the teeth is durable,safety and reliable.The machine is in conformity with the requirements of "GMP".
　　Through balance test of gear disk with high speed.It is proved that evne if this machine is rotated at high speed.It is stable and no vibration during the period of ordinary operation.Being adapted the interlock apparatus between gear disk with high speed and driving shaft,it is complete reliable in operation.
　　GF30B2 is added water cooling system basising on GF30B.