主要特性與技術指標

頻率范圍為 10 MHz 至 33 GHz

USB 連通性及寬廣的動態范圍（-70 至 +26 dBm），適用于小信號測量

50,000 個讀數/秒的快速實時測量

高達 1 MB 的深存儲器和高達 1 MSa/s 的可變采樣率

以零靜寂時間進行實時測量，可確保對每一個連續脈沖都加以測量

平均模式時間選擇性功能能夠利用整個動態范圍執行平均功率測量和選定時間間隔的平均功率測量

內置歸零和自動校準功能可以節省測量時間，降低測量不確定度

使用 BenchVue 軟件，可以輕松開始測量

描述

Keysight U2040/53/63 和 L2050/60 X 系列寬動態范圍功率傳感器能夠精確地測量各種調制信號的功率。此類 USB/LAN 功率傳感器擁有 -70 至 +26 dBm 的寬廣動態范圍，可對各種調制信號執行高精度和可重復的功率測量，其測量速度高達 50,000 個讀數/秒，可以實現更高的生產吞吐量。內置歸零和校準功能有助于用戶節省測量時間和降低測量不確定度。U2040/53/63 和 L2050/60 X 系列功率傳感器可以獲得 Keysight BenchVue 軟件的支持。BenchVue 軟件使您無需編程，便可輕松控制功率計以記錄數據，并通過廣泛的顯示選項顯示測量結果。只需將此傳感器連接至安裝有 BenchVue BV0007B 功率計/傳感器控制和分析應用軟件的計算機，便可執行平均功率測量和分析。

Main features and technical indicators

The frequency range is 10 MHz to 33 GHz

USB connectivity and wide dynamic range (-70 to +26 dBm) for small signal measurements

Fast real-time measurement of 50,000 readings/SEC

Up to 1 MB of deep memory and up to 1 MSa/s of variable sampling rate

Real time measurement at zero quiet time ensures that each continuous pulse is measured

The average mode time selection function can perform average power measurements and average power measurements for selected time intervals across the entire dynamic range

Built-in zeroing and automatic calibration functions can save measurement time and reduce measurement uncertainty

BenchVue software makes it easy to start measuring

describe

Keysight u2040/53/63 and l2050/60 X series wide dynamic range power sensors can accurately measure the power of various modulated signals. With a wide dynamic range of -70 to +26 dBm, this USB/LAN power sensor can perform high-precision and repeatable power measurements for a variety of modulated signals at a speed of up to 50,000 readings per second, enabling higher production throughput. Built-in zeroing and calibration functions help users save measurement time and reduce measurement uncertainty. The u2040/53/63 and l2050/60 X series power sensors are supported by Keysight BenchVue software. BenchVue software allows you to easily control the power meter to record data without programming and display measurements with a wide range of display options. The BenchVue BV0007B power meter/sensor control and analysis application software is installed on a computer to perform the average power measurement and analysis.