主要特性

滿足標準的電能質量: 所有測量均符合 IEC61000-4-30 標準以正確評估所有測量值，包括電壓、電流、功率、諧波和閃變等

快速而可靠的配置: ARCHOS 43 Internet Tablet 提供了儀器所記錄內容的視窗，即使在棘手的測試位置，也可進行快速而可靠的配置

無閾值設置:在使用 Fluke 電能分析軟件收集數據后應用閾值 – 無需擔心因設置錯誤而遺失信息

捕捉所有情況:交叉通道和電流觸發功能隨時捕捉每個通道上的每項測量

直觀的 PC 軟件:輕松分析數據并根據自動化 EN50160 報告和標準生成報告

即插即用:使用能自我識別的電流探頭和單線電壓連接，可在幾分鐘內完成設置

無需重新連接線路:連接不正確時，與無線 PDA 或 PC 進行內部通道交換

測量每項參數: 個相位、零線和地線的電壓和電流

5 MHz，8000 Vpk 波形捕捉:可捕獲最短事件的詳細圖片

快速檢索數據:借助于隨附的 SD 內存卡或通過 100BaseT 高速以太網連接。 當儀器沒有其他連接時，SD 卡包含自動下載的內容

The main features

Power quality meeting standards: all measurements comply with iec61000-4-30 to correctly evaluate all measurements, including voltage, current, power, harmonics, and flicker

Fast and reliable configuration: the ARCHOS 43 Internet Tablet provides a window into what the instrument is recording, enabling fast and reliable configuration even in tricky test locations

No threshold setting: apply the threshold after collecting data with Fluke power analysis software -- no need to worry about losing information due to wrong setting

Capture all conditions: the cross channel and current trigger functions capture every measurement on each channel at any time

Intuitive PC software: easily analyzes data and generates reports based on automated EN50160 reports and standards

Plug and play: set up in minutes using a self-identifying current probe and a single-wire voltage connection

No need to reconnect the line: internal channel switching with a wireless PDA or PC if the connection is incorrect

Measure the voltage and current of each parameter: phase, zero and ground

5 MHz, 8000 Vpk waveform capture: can capture the shortest detailed picture of the event

Fast data retrieval: via the accompanying SD memory card or via a 100BaseT high-speed Ethernet connection. The SD card contains content that is automatically downloaded when the instrument is not otherwise connected