在實際條件下測試電池供電的便攜式設備，需要一個直流電源可以在各種不同狀況下模擬電池性能。 2300 系列電池模擬電源可模擬電池的輸出電阻和輸出電壓響應。 這些電源的雙通道版本提供一條通道充當電池并接收電流，用于模擬放電的可充電電池；另一條通道提供電壓用于測試設備的充電控制電路。

The characteristics of

advantage

The ultra-fast response to the transient load current provides exactly the same output characteristics as the actual battery.

Variable output resistor

Allows to simulate the internal resistance of the battery.

Pulse peak, mean and baseline load current measurements support the measurement of load current for power verification or analysis.

The 100nA dc current sensitivity provides the required sensitivity to monitor low sleeping mode currents in battery-powered products.

The current level measurement function supports the measurement of load current at various operating conditions.

A rechargeable battery that receives up to 3A as an electronic load, allowing these power supplies to simulate discharge, for testing the performance of a battery charger or battery charger control circuit.

Turn on the sensor wire to detect if there is a break in the remote sensor wire or if there is an open connection between the remote sensor wire and the test fixture.

The built-in digital voltmeter allows the measurement of -- 5V to +30V dc signals at any point in the test system with the same rated accuracy as the power voltage read back.