日本PEACOCK標準型缸徑規配有多種可交換測頭和必需的配件，可進行孔、錐度、球形的精密測量。日本PEACOCK標準型缸徑規配有多種可交換測頭和必需的配件，可進行孔、錐度、球形的精密測量。日本PEACOCK標準型缸徑規質量可靠，歡迎選購

日本PEACOCK標準型缸徑規配有多種可交換測頭和必需的配件，可進行孔、錐度、球形的精密測量。
－量表安裝旋鈕非常簡單，克服的以往采用夾頭的不足．
－接觸點為碳化鎢球．
－缸徑規不帶量表，定單要求時，才配套提供量表．適合安裝的量表為17Z、57B（0.01mm)和15Z、5F（0.001mm)
－可更換桿的標準頭材料為鋼。標準頭也可以是燒結硬質合金球。
－缸徑規都符合JIS 標準
寬范圍精度……小于或等于5um
鄰接誤差……小于或等于2um
重復誤差……小于或等于2um

Peacock offers a complete line of Dial Bore Gauges with interchangeable anvils and necessary  accessories to perform close tolerance measurements of holes, taper and roundness. Dial gauge mounting knob is very simple of and sure avoiding demerit of collet-system. The contact point is tungsten carbide ball. Dial gauge is not furnished and supplied only on request.   Suitable dial gauges are 17Z, 57B (0.01mm) and 15Z, 5F (0.001mm). The standard ball tipped at the replacement rod is made of steel.   The sintered hard-alloy ball is also available to tip.
Standard Cylinder Gauges ; CC series
Model CC-3C Range 50 - 150mm With 50mm extension collar	Model CC-4 Range 100 - 160mm	Model CC-6 Range 250 - 400mm
Model CC-02 Range 6 - 10mm	Model CC-01 Range 10 - 18mm	CC-1 head details
		CC-2 head details

| Page Top |

Specifications
Model		Range (mm)	Effective measuring range (mm)	Wide range accuracy (µm)	Adjacent error (µm)	Repeated accuracy (µm)	Number of anvils (mm)	Thickness of spacers (mm)	Extension collar (mm)
CC-02		6 - 10	0.5	5	2	2	Intervals 0.5mm×9	--
CC-01		10 - 18	0.5	5	2	2	Intervals 1mm×9	0.5mm
CC-1		18 - 35	1.2	5	2	2	Intervals 2mm×9	0.5, 1mm each
CC-2		35 - 60	1.2	5	2	2	Intervals 5mm×6	1, 2, 3mm each
CC-3		50 - 100	1.2	5	2	2	Intervals 5mm×11	1, 2, 3mm each
CC-3C		50 - 150	1.2	5	2	2	Intervals 5mm×11	1, 2, 3mm each	50mm×1
CC-4		100 - 160	1.2	5	2	2	Intervals 10mm×7	1, 2, 3, 4mm each
CC-5		160 - 250	1.2	5	2	2	Intervals 10mm×10	1, 2, 3, 4mm each
CC-6		250 - 400	1.2	5	2	2	Intervals 10mm×16	1, 2, 3, 4mm each
List of special length below grip (available on request)

Dimensions (mm)
Model	A	B	C	D	E	F	G	H	I	J
CC-1	249	150	5.75	70	23	20	10	18 - 35	13	11.5
CC-2	251.5	150	8.5	70	23	20	10	35 - 60	22	17
CC-3	253	150	9	70	23	20	10	50 - 100	30	18
CC-3C	253	150	9	70	23	20	10	50 - 150	30	18
CC-4	370	250	12	85	23	25	13	100 - 160	50	24
CC-5	391.5	251.5	14	100	26	25	16	160 - 250	70	28
CC-6	540	400	14	100	26	25	16	250 - 400	100	28
Dimensions (mm) CC-02
Dimensions (mm) CC-01

| Page Top |

Dimensions for Anvil for Cylinder Gauges
Model Size (mm) L (mm) CC-1 Anvil ※ 18 2 20 4 22 6 24 8 26 10 28 12 30 14 32 16 34 18
Model Size (mm) L (mm) CC-2 Anvil 35 5 40 10 45 15 50 20 55 25 60 30
Model Size (mm) L (mm) CC-3 CC-3C Anvil 50 5 55 10 60 15 65 20 70 25 75 30 80 35 85 40 90 45 95 50 100 55
Model Size (mm) L (mm) CC-4 Anvil 100 10 110 20 120 30 130 40 140 50 150 60 160 70
Model Size (mm) L (mm) CC-5 Anvil 160 10 170 20 180 30 190 40 200 50 210 60 220 70 230 80 240 90 250 100
Model Size (mm) L (mm) CC-6 Anvil 250 10 260 20 270 30 280 40 290 50 300 60 310 70 320 80 330 90 340 100 350 110 360 120 370 130 380 140 390 150 400 160

Dimensions for Spacers for Cylinder Gauges
Model T (mm) A (mm) B (mm) CC-1 0.5, 1 4.1 7 CC-2 1, 2, 3 5.1 8 CC-3 1, 2, 3 5.1 8 CC-3C 1, 2, 3 5.1 8 CC-4 1, 2, 3, 4 6.1 10 CC-5 1, 2, 3, 4 6.1 10 CC-6 1, 2, 3, 4 9.1 13

型號	測量范圍mm	手柄下的長度mm	測鉆數量	墊片數量
CC-02	6-10	50	間隔為0.5mm,共9支	－
CC-01	10-18	100	間隔為1mm,共9支	0.5mm
CC-1	18-35	150	間隔為2mm,共9支	0.5/1mm各一塊
CC-2	35-60	150	間隔為5mm,共6支	1/2/3mm各一塊
CC-3	50-100	150	間隔為5mm,共11支	1/2/3mm各一塊
CC-3C	50-150	150	間隔為5mm,共11支	1/2/3mm各一塊
CC-4	100-160	250	間隔為10mm,共7支	1/2/3/4mm各一塊
CC-5	160-250	250	間隔為10mm,共10支	1/2/3/4mm各一塊
CC-6	250-400	400	間隔為10mm,共16支	1/2/3/4mm各一塊

注明:如圖所示,表頭為選配件.