亚洲人妻在线观,精品中文二区三区,精品熟女人妻一区二区

參考價	面議

詳細介紹

微機控制電纜和光纜絕緣和護套材料拉力試驗機

1.簡介

該微機控制電纜和光纜絕緣和護套材料拉力試驗機用于檢測通信用電纜和光纜,包括船舶及近海用電纜和光纜的聚合物絕緣和護套材料的抗拉伸性能,同時也適用于普通類型的絕緣和護套材料,如彈性體,聚氯乙烯,聚乙烯,聚丙烯等材料的拉伸性能檢測.

2.試驗方法

GB/T 2951.11 電纜和光纜絕緣和護套材料通用試驗方法第11部分:通用試驗方法------厚度和外形尺寸測量------機械性能試驗 common test methods for insulating and sheathing materials of electric and optical cables------part 11: methods of general application------measurement of thickness and overall dimensions------tests for determining the mechanical properties

EN 60811-501 electric and optical fibre cables------test methods for non-metallic materials------part 501:mechanical tests------tests for determining the mechanical properties of insulating and sheathing compounds 電線和光纜------非金屬材料的試驗方法------第501部分：機械試驗-------絕緣和護套化合物力學性能測定試驗

IEC 60811-1-1 common test methods for insulating and sheathing materials of electric cables and optical cables------part 1-1:methods for general application------measurement of thickness and overall dimensions------tests fo determining the mechanical properties

電纜和光纜絕緣和護套材料拉力試驗中的術語:

拉力 (maximum tensile force):試驗期間負荷達到的值

拉伸應力(tensile stress):試件未拉伸時的單位面積上的拉力

抗張強度(tensile strength):拉伸試件至斷裂時記錄的抗拉應力

斷裂伸長率(elongation at break):試件拉伸至斷裂時,標記距離的增量與未拉伸試樣的標記距離的百分比

中間值(median value):將獲得的應有個數的試驗數據以遞增或遞減次序排列,當有效個數為奇數時,則中間值為正中間一個數值;若為偶數時,則中間值為中間兩個數值的平均值

3.試驗機技術參數

序號	項目	規格
1	試驗力	20KN及以下	30/50KN		100KN
2	試驗力測量范圍	1%-99%FS
3	試驗力測量準確度	優于示值±1%
4	橫梁位移測量精度	0.01mm
5	位移測量準確度	±1%
6	變形測量范圍	0.4%-99%FS
7	變形測量精度	±0.5%
8	變形分辨率	0.01mm
9	力控速率調節范圍	0.005-5%FS/S
10	力控速率相對誤差	±1%設定值以內
11	變形速率調節范圍	0.02-5%FS/S
12	變形控制速率相對誤差	速率＜0.05％FS時，為±2%設定值以內；速率≥0.05％FS時，為±0.5%設定值以內；
13	橫梁速度測量范圍	0.001-500mm/min
14	橫梁速度相對誤差	速率＜0.01 mm/min時，設定值的±1.0%以內；速率≥0.01 mm/min時，設定值的±0.2%以內；
15	恒力、恒變形、恒位移控制范圍	0.5％～100％FS
16	恒力、恒變形、恒位移控制范圍	設定值<10%FS時，設定值的±1.0%以內設定值≥10%FS時,設定值的±0.1%以內
17	變形速率控制精度	速率<0.05%FS時為±2.0%設定值內速率≥0.05%FS時為±0.5%設定值內
18	拉伸空間	700mm	700mm	700mm
19	工作環境	室溫—35℃,相對濕度不超過80%
20	整機電源	單相,220V±10%,50Hz
21	電機功率	0.75KW	0.75KW	1.5KW
22	主機尺寸	750x480x1700mm	720x520x1800mm	900x600x2100mm
23	重量	280kg	350kg	450kg

4.試驗軟件特點

4.1.自動停機：試樣斷裂后，移動橫梁自動停止；

4.2.條件存盤：試驗控制數據和試樣條件可制成模塊，方便了批量試驗的進行；

4.3.自動變速：試驗過程中移動橫梁的速度可按預先設定的程序自動變化，也可手動變化；

4.4.自動標定：系統可自動實現示值準確度的標定；

4.5.自動保存：試驗結束，試驗數據和曲線自動保存；

4.6.過程實現：試驗過程、測量、顯示和分析等均由微機完成；

4.7.批量試驗：對相同參數的試樣，一次設定后可順次完成

4.8.試驗軟件：中文WINDOWS界面，菜單提示，鼠標操作；

4.9.顯示方式：數據和曲線隨試驗過程動態顯示；

4.10.曲線遍歷：試驗完成后，可對曲線進行再分析，用鼠標可找到曲線上任一點所對應的試驗數據；

4.11.曲線選擇：可根據需要選擇應力-應變、力-位移、力-時間、位移-時間等曲線進行顯示和打?。?/span>

12.試驗報告：可按用戶要求的格式編制報告并打??；

13.限位保護：具有程控和機械兩級限位保護；

14.過載保護：當負荷超過各檔值的3-5%時，自動停機；

15.自動和人工兩種模式求取試驗結果，自動形成報表，使數據分析過程簡便。

Computer control insulating and sheathing materials of electric and optical cables testing machine

1.introductions

This computer control insulating and sheathing materials of electric and optical cables testing machine is to measure and determine the tensile properties of insulating and sheathing materials used on electric and optical cables for communication, ship and offshore. This tensile testing machine is also suitable for normal insulating and sheathing materials, such as elastomer, Polyvinyl chloride, polyethylene, polypropylene, etc. in tensile properties measuring.

2. test method

GB/T 2951.11 common test methods for insulating and sheathing materials of electric and optical cables------part 11: methods of general application------measurement of thickness and overall dimensions------tests for determining the mechanical properties

3. measuring parameters

maximum tensile force: highest value reached by the load during the test

tensile stress: tensile force per unit of the cross-sectional area of the unstreched test piece

tensile strength: maximum tensile stress recorded in extending the test piece to breaking point

elongation at break: increase of the length between the reference marks of the test piece, expresses at the percentage of the length between the reference marks of the unstreched test piece at breaking point

4. technical specifiations

No	Item	Specification
1	Force capacity	20KN and lower	30/50KN		100KN
2	Measuring range	1%-99%FS
3	Accuracy of force value	Less than ±1% of set value
4	Precision of displacement	0.01mm
5	Accuracy of displacement value	±1%
6	Deformation measuring range	0.4%-99%FS
7	Accuracy of deformation measuring	±0.5%
8	Resolution of deformation	0.01mm
9	Force speed range	0.005-5%FS/S
10	Accuracy of force speed	Less than ±1% of set value
11	Deformation speed range	0.02-5%FS/S
12	Accuracy of deformation speed control	set value is less than 0.05%FS，error is less than ±2.0% of set value set value is more than 0.05%FS，error is less than ±0.5% of set value
13	Displacement speed range	0.001-500mm/min
14	Accuracy of displacement speed	speed is less than 0.01mm/min，error is less than ±1.0% of set value speed is more than 0.01mm/min，error is less than ±0.2% of set value
15	Range of constant force, constant deformation, constant displacement control	0.5％～100％FS
16	Accuracy of constant force, constant deformation, constant displacement control	set value is less than 10%FS，error is less than ±1.0% of set value set value is more than 10%FS，error is less than ±0.1% of set value
17	Accuracy of deformation speed	set value is less than 0.05%FS,error is less than ±2.0% of set value set value is more than 0.05%FS,error is less than ±0.5% of set value
18	Tension space	700mm		700mm		700mm
20	Voltage	Single phase,220V±10%,50Hz(110V)
21	Motor power	0.75KW		0.75KW		1.5KW
22	Dimension	750x480x1700mm		720x520x1800mm		900x600x2100mm
23	Weight	280kg		350kg		450kg

久久亚洲精品天码av,午夜福利屄插穴,午夜福利视频91,亚欧美爽爽爽爽爽,亚洲欧美日韩色色图片,青青操在线观看,精品天堂麻豆av,无码av东京热,婷婷成人亚洲少妇

微機控制電纜和光纜絕緣和護套材料拉力試驗機

產品簡介

詳細介紹

其他推薦產品

會員登錄

公司名片

收藏該商鋪

提示

收藏該商鋪

制藥網