·上下無絞龍設計：取消了干燥機原上下絞龍結構，提升機進糧和排糧均采用傾斜溜管，利用谷物自重自由下落，無擠壓破碎。

·Upper and lower auger design: The original upper and lower auger structure of the dryer is cancelled. The elevator adopts inclined chute for grain feeding and discharging, and the grains fall freely under their own weight without crushing.

·前推后拉大風量設計：干燥段配有3臺斜流風機，進風口一臺風機正壓送風、出風口兩臺風機負壓吸風，平衡風量、減少阻力、提高熱風利用率。

·Design of large air volume by pushing forward and pulling back: The drying section is equipped with 3 diagonal fans, one fan at the air inlet provides positive air pressure, and two fans at the air outlet suction air to balance the air volume, reduce resistance, and improve the utilization rate of hot air.

·大干燥段設計：干燥段高度1.6m以上，兩段組合，強度高不變形，干燥層合理排糧流速穩(wěn)定，干燥均勻，干燥速率較高。

·Large drying section design: the height of the drying section is more than 1.6m, the two sections are combined, the strength is high, and the drying layer is reasonable, stable flow rate, uniform drying, and high drying rate.

·單獨除塵設計：在提升機頭部設有單獨除塵風機和管道，能及時帶走糧食在循環(huán)過程中的灰塵和輕雜質等，使谷物更加干凈，加工間內的灰塵大大減少，提高了作業(yè)現場環(huán)境質量。

· Separate dust removal design: Separate dust removal fans and pipes are installed at the head of the hoist, which can take away the dust and light impurities in the grain circulation process in time, so that the grains are cleaner, the dust in the processing room is greatly reduced, and the operation is improved On-site environmental quality.

·自動調溫控制：進風入口配有關風門和配風門，可根據設定溫度需要和溫度傳感器測試的溫度，始終控制熱風溫度在設定溫度的±5-7℃范圍內。

· Automatic temperature adjustment control: The inlet of the air is equipped with the relevant air door and the air door, and the temperature of the hot air can always be controlled within the range of ±5-7°C of the set temperature according to the set temperature requirements and the temperature tested by the temperature sensor.

·水分控制準確：新型電控箱的控制界面更加清晰、增加了稻谷、小麥、油菜籽和玉米等多種物料的程序控制，選好物料可一鍵干燥，不同水分采取不同溫度烘干，保證物料品質；電控箱可選用國產水分儀或進口水分儀及新型傳感器水分儀（正在試驗，成功后推廣）保證水分測定在±0.5%范圍內，保證糧食品質。

·Accurate moisture control: The control interface of the new electric control box is clearer, and the program control of various materials such as rice, wheat, rapeseed and corn has been added. The selected materials can be dried with one button. Different moistures can be dried at different temperatures. Good to ensure the quality of the material; the electric control box can choose domestic moisture meter or imported moisture meter and new sensor moisture meter (under test and will be promoted after success) to ensure that the moisture measurement is within ±0.5% to ensure grain quality.