粗碎機（CE） RoughCrusher (CEApproved)1.概述(Description)：粗碎機廣泛應用于制藥工業，食品工業，化學，橡膠，電子工業等領域

粗碎機（CE）
Rough Crusher ( CE Approved )

1. 概述( Description )：

粗碎機廣泛應用于制藥工業，食品工業，化學，橡膠，電子工業等領域。
Rough crusher is a kind of crusher widely used in pharmaceutical industry ,food industry , chemical industry, Rubber industry ,Electrical industry ,etc… .

2. 原理( Principle )：

整個系統包括固定的定刀和高速旋轉的勾狀刀或者剪切式動刀，動刀下面固定一張多孔網，網孔的大小可選，物料從上部的進料口流入，被動刀和定刀撕碎或切碎，小于篩網孔徑的物料穿過篩網排出，其余大塊物料繼續在里面破碎，當動刀旋轉的時候，會產生正壓，有氣流產生，若用于固體粉碎，可能會產生粉塵，一個額外的除塵器需要安裝在粗碎機的旁邊，用來收集從粗碎機出來的粉塵。

The whole system include a fixed knife and a high speed rotating knife group , a net under the knife , the net hole size is selectable , material come in from the top inlet and was crushed by rotating knife and fixed knife , the crushed material which size less than net hole can come out , other big briquettes was continuously crushed by rotating knife. when knife rotating , some pressure and air flow generated ,if for crush solid material without moisture , one additional filter beside the crusher for collect the dust from the outlet of crusher is necessary .

3、應用范圍（ Application Scope ）

適用于需要將原料破碎成顆粒，篩網的孔徑一般在10 -20mm 。
It is suitable for the raw materials that need to be crushed into granules , the net size normally in10 to 20 mm

4、技術參數Technical parameter

型號Model	CSJ-100	CSJ-200
產量Capacity（kg/h)	50-300	50-700
進料粒度 Size of input granules(mm)	≤50	≤50
出料粒度 Size of output granules(mm)	5-20	5-20
裝機功率 Power（kw）	3	7.5
轉速 Speed of rotating knife（rpm)	400	400
外形尺寸 Overall size （L×W×H）(mm)	700×600×1270	1080×950×1450
重量 Weight (kg)	300	800

Note: customized equipment is acceptable for us .
CE & UL requirement is acceptable for us .