過濾洗滌二合一撬裝生產工藝流程
Filter and wash two-in-one skid-mounted production proces flow

物料通過行車倒入1號震動篩選機，篩選機將大顆粒物篩除供后再送入離心機，通過離心方式將物料內的油分離出并收集起來，再通過2號篩選機進一步篩除
大顆粒物后送入料斗，料斗裝入一定量物料后打開插板閥通過1號螺旋絞龍輸送機送入二合一過濾機，往二合一過濾機內加入洗滌液，經過反復洗滌和過濾達
到產品要求后，打開二合一過濾機出料閥通過2號螺旋絞龍輸送機將輸送至成品區裝袋。
Materials are dumped intothe vibrating screen by the trolley, the screen removes large particles and then sendsthem into the centrif, which separates
ａnd collects the oil in the materials through centrifugation,ａnd then sends them into the hopper after beingfurtherscreened by the No.2 screen to remove
large.When the hopperi filed witha certain amount of material,the plugvalveis opened and the materalis sent intothe two-in-one filte by the No.spiralauger conveyor.Wash water is aded to the two-in-one filter, and after repeated washing and fitering to met the product requirements,the discharge
valve of the-in-one filter is opened and the material is sent to the finished product area for bagging by the No.2 spiral auger conveyor.

過濾洗滌干燥三合一撬裝生產工藝流程
Fltering Washing Drying Thre-in-on Skid-mounted Production ProcessFlow

物料在反應釜內攪拌反應生成晶體，打開反應釜底部下展閥，通過高低位差將反應釜內固液混合物轉移至三合一過濾機，向三合一過濾機內加壓將濾液壓入母液收集罐得到固體料，再將洗滌液加入三合一過濾機反復洗滌和過濾。啟動真空泵，將三合一過濾機抽負壓，固體物料在真空環境下加熱干燥，在干燥若干小時后取樣達標后，通過攪拌槳將物料刮鏟入成品料斗。
Materias are stired in th reactor to react and generate crystals,the bottom valve of the reactor is opened,ａnd the solid-liquid mixture in the reactor istransfered to the three-in-one filter though a highａnd lowleveldiference,ａnd theflter presure is added to the three-in-one filter to obtain solid materials,ａnd then the washin liquid s aded to the thre-in-one filter for repeated washing and fitration.Start the vacum pump,vacuum the thre-in-one flter,heatａnd dry the solid materals under vacuum,ａnd take samples aer drying for several hours to met the standard,then scrape the materials into the finishedmaterial bin through th siring padle.