玻璃鋼P(yáng)P熔噴濾芯過濾器，玻璃鋼袋式過濾器，玻璃鋼大流量過濾器FRPPPmelt-blownflterhousing,FRPbagflterhousing,FRPmax-fowcartridgehousing一、產品特點PRODUCTFEATURES1.筒體采用玻璃鋼纏繞工藝，耐腐蝕、耐高壓、耐滲漏

玻璃鋼P(yáng)P熔噴濾芯過濾器，玻璃鋼袋式過濾器，玻璃鋼大流量過濾器

FRP PP melt-blown flter housing,FRP bag flter housing,FRP max-fow cartridge housing

一、產品特點  PRODUCT FEATURES

1.筒體采用玻璃鋼纏繞工藝，耐腐蝕、耐高壓、耐滲漏。  

The housing body adopts FRP winding technology,Corrosion avoidance,high-pressure resistant and no leakage. 

2.內部結構新穎合理，下端為密封支撐，并有安裝導引，上端有定位加密封盒,并有緊固螺母可調節密封度。

Theintermalstructureisnovelandreasonable,ithasasealedsupportonthelowerendwithaninstallation guide a positioning and sealing box with a damp nut to adjust the tightness in the top end.

3.部件均為玻璃鋼模壓而成，耐高壓、耐腐蝕、無滲漏。

Thesparepartsaremoldedfromfiber-glass,high-pressureresistant,corrosionavoidanceandnoleakage.

4.安裝方建,采用手動吊環式開啟，在安裝濾芯及更換濾芯時無需任何工具即可操作。

Easyinstallation.Weuselifting-eyeboltopening,whichmakesnotooloperationininstallingand maintaining.

5.濾芯安裝時有結構引導，自動對位，簡單方便。  

There is a structure guide inside to align the filter automatically in installation,easy and convenient.

6.表面采用烤漆工藝，美觀大方，材料環保，色澤可調.

Thesurfaceiscoatedwithpaintbeautifulandelegant,environmentalmaterial,severalcolorsforchoice.

二、工作原理 WORKING PRINCIPLE

保安過濾器又稱精密過濾器，一種壓力式過濾裝置,采用成型的濾材，在壓力的作用下.使原液通過濾材，濾渣留在管壁上，濾液透過濾材流出，從而達到過濾的目的。因?yàn)V材的不同,過淀孔徑也不相同。精密過濾是介于砂率(粗濾)與超濾之間的一種過濾,過濾孔徑一般在0.5-100μm范圉。采用噴熔工藝形成的濾材，工作溫度60℃。精密過濾可去除水中的懸浮物,某些膠體物質和小顆粒物。

Security Filter,also known as precision flter housing.one of the pressure flter housing device.which uses the  molded flter material.Under the presaure,it makes the concentrate pass through the flter material,the residuum left  on the tube wall and the fltrate permeate from the flter material to achieve the purpose of fltration between sａnd flter materials,the flter pores are different too.Precision fltration between sａnd fltration (Coarse ftration) and ultrafltration.The flter pore size is in the range of 0.5-100μm generally.The ftter material from melt-blown technology can work  under the max temperature 60℃.Precision fltration can remove suspended solid,some colloidal substances and small particles in water.

袋式過濾器FRP Bag  Filter Housing

FRP玻璃鋼袋式過濾器，內裝φ180mm×820mm濾袋。 

FRP bag filter housing for φ180mm×820mm bag filter.

一、安裝尺寸 INSTALLATION MEASUREMENT

 

二、產品規格及參數 SPECIFICATIONS AND TECHNICAL INFORMATION

型號 Model	直徑 Diameter(mm)	高度 L1 Height L1(mm)	高度 L2 Height L2(mm)	高度 L3 Height L3(mm)	進出水口F/C Port	流量 Flow(T/H)
1號袋 L20-1B	280	720	139	520	2''	10-20
2號袋 L40-1B	280	1090	139	870	2''-2.5''	25-30

  使用壓力 Max Working Pressure：0.8Mpa      使用溫度 Working Temp.：5-66℃    

* L1、L2數據請參看安裝尺寸圖。

* L1、L2 data please refer to    installation measurement drawing. 

*進出水口可選擇法蘭、卡箍

* Theinletandoutletcanchooseflange,   victaulic coupling for port.

三、注意事項  CAUTIONS 

1.濾芯安裝到位，固定鎖塊旋轉60度。

2.工作壓力不能超過額定范圍。 

3.開機前打開排氣閥，空氣排盡后關閉排氣閥。

4.當壓差超過額定范圍時，及時更換濾材。 

1.Install the flter cartridge into position,rotate the locking block by 60 degree. 

2.Working pressure can't exceed the rated range. 

3.Open the exhaust valve before starting the machine,then close the exhaust valve after the air is exhausted.

4.Please replace the flter material in time when the differential pressure exceeds the rated range.

多袋式過濾器 FRP Muti-bag filter housing

二、產品規格及參數 SPECIFICATIONS AND TECHNICAL INFORMATION

型號 Model	濾袋數量Bag Qty	直徑Diameter(mm)	高度 L1 Height L1(mm)	高度 L2 Height L2(mm)	高度 L3 Height L3(mm)	進出水口 F/C Port	流量 Flow(T/H)
L40-3B	3	500	1450	1210	159	DN125	75-90
L40-4B	4	725	1405	1040	280	DN125	120
L40-5B	5	725	1405	1040	280	DN125	150
L40-6B	6	725	1405	1040	280	DN150	180
L40-7B	7	725	1405	1040	280	DN200	210
使用壓力 Max Working Pressure：0.8Mpa 使用溫度 Working Temp.：5-66℃

* L1、L2 數據請參看安裝尺寸圖。 * L1、L2 data please refer to   installation measurement drawing.

* 進出水口可選擇 DN200、DN150、DN125、DN100。 * The inlet and outlet can choose DN200,   DN150, DN125 and DN100.

三、注意事項 CAUTIONS 

1. 濾芯安裝到位，固定密封塊螺母擰緊。 

2. 工作壓力不能超過額定范圍。

 3. 開機前打開排氣閥，空氣排盡后關閉排氣閥。

4. 當壓差超過額定范圍時，及時更換濾材。

1. Install the filter cartridge into position, tighten the fixed seal nut. 

2. Working pressure can’t exceed the rated range. 

3. Open the exhaust valve before starting the machine, then close the exhaust valve after the air is exhausted. 

4. Please replace the filter material in time when the differential pressure exceeds the rated range.